Chore/zb switch mem improvements

drivers/SmartThings/zigbee-switch/src/configurations/devices.lua

@@ -0,0 +1,126 @@
+-- Copyright 2025 SmartThings
+--
+-- Licensed under the Apache License, Version 2.0 (the "License");
+-- you may not use this file except in compliance with the License.
+-- You may obtain a copy of the License at
+--
+--     http://www.apache.org/licenses/LICENSE-2.0
+--
+-- Unless required by applicable law or agreed to in writing, software
+-- distributed under the License is distributed on an "AS IS" BASIS,
+-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+-- See the License for the specific language governing permissions and
+-- limitations under the License.
+
+local clusters = require "st.zigbee.zcl.clusters"
+local ColorControl = clusters.ColorControl
+local IASZone = clusters.IASZone
+local ElectricalMeasurement = clusters.ElectricalMeasurement
+local SimpleMetering = clusters.SimpleMetering
+local Alarms = clusters.Alarms
+local constants = require "st.zigbee.constants"
+
+local devices = {
+  IKEA_RGB_BULB = {
+    FINGERPRINTS = {
+      { mfr = "IKEA of Sweden", model = "TRADFRI bulb E27 CWS opal 600lm" },
+      { mfr = "IKEA of Sweden", model = "TRADFRI bulb E26 CWS opal 600lm" }
+    },
+    CONFIGURATION = {
+      {
+        cluster = ColorControl.ID,
+        attribute = ColorControl.attributes.CurrentX.ID,
+        minimum_interval = 1,
+        maximum_interval = 3600,
+        data_type = ColorControl.attributes.CurrentX.base_type,
+        reportable_change = 16
+      },
+      {
+        cluster = ColorControl.ID,
+        attribute = ColorControl.attributes.CurrentY.ID,
+        minimum_interval = 1,
+        maximum_interval = 3600,
+        data_type = ColorControl.attributes.CurrentY.base_type,
+        reportable_change = 16
+      }
+    }
+  },
+  SENGLED_BULB_WITH_MOTION_SENSOR = {
+    FINGERPRINTS = {
+      { mfr = "sengled", model = "E13-N11" }
+    },
+    CONFIGURATION = {
+      {
+        cluster = IASZone.ID,
+        attribute = IASZone.attributes.ZoneStatus.ID,
+        minimum_interval = 30,
+        maximum_interval = 300,
+        data_type = IASZone.attributes.ZoneStatus.base_type
+      }
+    },
+    IAS_ZONE_CONFIG_METHOD = constants.IAS_ZONE_CONFIGURE_TYPE.AUTO_ENROLL_RESPONSE
+  },
+  FRIENT_SWITCHES = {
+    FINGERPRINTS = {
+      { mfr = "frient A/S", model = "SPLZB-131" },
+      { mfr = "frient A/S", model = "SPLZB-132" },
+      { mfr = "frient A/S", model = "SPLZB-134" },
+      { mfr = "frient A/S", model = "SPLZB-137" },
+      { mfr = "frient A/S", model = "SPLZB-141" },
+      { mfr = "frient A/S", model = "SPLZB-142" },
+      { mfr = "frient A/S", model = "SPLZB-144" },
+      { mfr = "frient A/S", model = "SPLZB-147" },
+      { mfr = "frient A/S", model = "SMRZB-143" },
+      { mfr = "frient A/S", model = "SMRZB-153" },
+      { mfr = "frient A/S", model = "SMRZB-332" },
+      { mfr = "frient A/S", model = "SMRZB-342" }
+    },
+    CONFIGURATION = {
+      {
+        cluster = ElectricalMeasurement.ID,
+        attribute = ElectricalMeasurement.attributes.RMSVoltage.ID,
+        minimum_interval = 5,
+        maximum_interval = 3600,
+        data_type = ElectricalMeasurement.attributes.RMSVoltage.base_type,
+        reportable_change = 1
+      },{
+        cluster = ElectricalMeasurement.ID,
+        attribute = ElectricalMeasurement.attributes.RMSCurrent.ID,
+        minimum_interval = 5,
+        maximum_interval = 3600,
+        data_type = ElectricalMeasurement.attributes.RMSCurrent.base_type,
+        reportable_change = 1
+      },{
+        cluster = ElectricalMeasurement.ID,
+        attribute = ElectricalMeasurement.attributes.ActivePower.ID,
+        minimum_interval = 5,
+        maximum_interval = 3600,
+        data_type = ElectricalMeasurement.attributes.ActivePower.base_type,
+        reportable_change = 1
+      },{
+        cluster = SimpleMetering.ID,
+        attribute = SimpleMetering.attributes.InstantaneousDemand.ID,
+        minimum_interval = 5,
+        maximum_interval = 3600,
+        data_type = SimpleMetering.attributes.InstantaneousDemand.base_type,
+        reportable_change = 1
+      },{
+        cluster = SimpleMetering.ID,
+        attribute = SimpleMetering.attributes.CurrentSummationDelivered.ID,
+        minimum_interval = 5,
+        maximum_interval = 3600,
+        data_type = SimpleMetering.attributes.CurrentSummationDelivered.base_type,
+        reportable_change = 1
+      },{
+        cluster = Alarms.ID,
+        attribute = Alarms.attributes.AlarmCount.ID,
+        minimum_interval = 1,
+        maximum_interval = 3600,
+        data_type = Alarms.attributes.AlarmCount.base_type,
+        reportable_change = 1,
+      },
+    }
+  },
+}
+
+return devices