Skip to content

Fix typo #202

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
wants to merge 2 commits into
base: master
Choose a base branch
from
Open

Fix typo #202

Changes from all commits
Commits
Show all changes
2 commits
Select commit Hold shift + click to select a range
5f46281
Fix typo
WilliamBZA Nov 27, 2020
0224ff7
afer => after
WilliamBZA Nov 27, 2020
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
4 changes: 2 additions & 2 deletions calibration.html
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -185,8 +185,8 @@ <h4>Additional start gcode</h4>
<li>Telling the firmware to alter the flow rate of the gcode to follow. This does not mean the exact flow rate you have set in your own slicer. For example, using <b><a href="https://marlinfw.org/docs/gcode/M221.html" target="_blank">M221</a> S120</b> would set the flow rate to 120% of what it was originally sliced as in Simpilfy3D. Use this to compensate for obvious over or under extrusion you may encounter with these tests. Additional information available at the base of the <a href="#flow">Flow Rate</a> tab.</li>
<li><b>M221 S38</b> can also be used to compensate for 2.85 mm filament and <b>M221 S34</b> for 3.00 mm filament instead of the default 1.75 mm.</li>
<li>Setting the K factor for linear advance. For example, <b>M900 K0.11</b></li>
<li>Custom ABL sequence. By default, only G28 is present. This gcode will be inserted immediately afer that so custom commands can be used here.</li>
<li>Anythng else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
<li>Custom ABL sequence. By default, only G28 is present. This gcode will be inserted immediately after that so custom commands can be used here.</li>
<li>Anything else you have in your start gcode, such as setting acceleration values, E-steps, etc.</li>
</ul>
<textarea name="startgcode"></textarea>
</div>
Expand Down