ESP32 with cam module showcase

Ensure PlatformIO CLI is installed. If not, install it via pip:

pip install platformio

Open a terminal and navigate to the project directory:

cd espcam

Run the build command:

pio run

The project built without errors, using 26.7% of flash and 15.3% of RAM. The output files are in the esp32s3 directory. If you need to upload to the ESP32, use

pio run --target upload

Change WiFi credentials if you want to serve on exising network in main.cpp:

const char *WIFI_SSID = "PUT YOUR WIFI SSID HERE";

const char *WIFI_PASS = "PUT YOUR WIFI PASSWORD HERE";

Otherwise it will work as access point with this credentials in main.cpp:

WiFi.softAP("ESP32CAM", "12345678");