fix(h5): review SPI input clock

Also prevent to use HSE as it is not operational
as oscillator. See Errata sheet.

Fixes #2598

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

variants/STM32H5xx/H503CB(T-U)/generic_clock.c

@@ -47,7 +47,7 @@ WEAK void SystemClock_Config(void)
   RCC_OscInitStruct.PLL.PLLM = 1;
   RCC_OscInitStruct.PLL.PLLN = 125;
   RCC_OscInitStruct.PLL.PLLP = 2;
-  RCC_OscInitStruct.PLL.PLLQ = 2;
+  RCC_OscInitStruct.PLL.PLLQ = 10;
   RCC_OscInitStruct.PLL.PLLR = 2;
   RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1_VCIRANGE_2;
   RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1_VCORANGE_WIDE;

variants/STM32H5xx/H503RBT/generic_clock.c

@@ -43,7 +43,7 @@ WEAK void SystemClock_Config(void)
   RCC_OscInitStruct.PLL.PLLM = 1;
   RCC_OscInitStruct.PLL.PLLN = 125;
   RCC_OscInitStruct.PLL.PLLP = 2;
-  RCC_OscInitStruct.PLL.PLLQ = 2;
+  RCC_OscInitStruct.PLL.PLLQ = 10;
   RCC_OscInitStruct.PLL.PLLR = 2;
   RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1_VCIRANGE_2;
   RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1_VCORANGE_WIDE;
@@ -64,6 +64,10 @@ WEAK void SystemClock_Config(void)
     Error_Handler();
   }
 
+  /** Configure the programming delay
+  */
+  __HAL_FLASH_SET_PROGRAM_DELAY(FLASH_PROGRAMMING_DELAY_2);
+
   /* Initializes the peripherals clock */
   PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_ADCDAC | RCC_PERIPHCLK_LPUART1
                                              | RCC_PERIPHCLK_USB;
@@ -72,7 +76,7 @@ WEAK void SystemClock_Config(void)
   PeriphClkInitStruct.PLL2.PLL2N = 125;
   PeriphClkInitStruct.PLL2.PLL2P = 2;
   PeriphClkInitStruct.PLL2.PLL2Q = 15;
-  PeriphClkInitStruct.PLL2.PLL2R = 4;
+  PeriphClkInitStruct.PLL2.PLL2R = 10;
   PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2_VCIRANGE_2;
   PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2_VCORANGE_WIDE;
   PeriphClkInitStruct.PLL2.PLL2FRACN = 0;

variants/STM32H5xx/H503RBT/variant_NUCLEO_H503RB.cpp

@@ -114,20 +114,25 @@ WEAK void SystemClock_Config(void)
 
   while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
 
+  /** Configure LSE Drive Capability
+  *  Warning : Only applied when the LSE is disabled.
+  */
+  HAL_PWR_EnableBkUpAccess();
+  __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
+
   /* Initializes the RCC Oscillators according to the specified parameters in the RCC_OscInitTypeDef structure */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE
-                                     | RCC_OSCILLATORTYPE_LSE;
-  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_CSI;
   RCC_OscInitStruct.LSEState = RCC_LSE_ON;
-  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.CSIState = RCC_CSI_ON;
+  RCC_OscInitStruct.CSICalibrationValue = RCC_CSICALIBRATION_DEFAULT;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLL1_SOURCE_HSE;
-  RCC_OscInitStruct.PLL.PLLM = 12;
-  RCC_OscInitStruct.PLL.PLLN = 250;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLL1_SOURCE_CSI;
+  RCC_OscInitStruct.PLL.PLLM = 1;
+  RCC_OscInitStruct.PLL.PLLN = 125;
   RCC_OscInitStruct.PLL.PLLP = 2;
-  RCC_OscInitStruct.PLL.PLLQ = 2;
+  RCC_OscInitStruct.PLL.PLLQ = 10;
   RCC_OscInitStruct.PLL.PLLR = 2;
-  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1_VCIRANGE_1;
+  RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1_VCIRANGE_2;
   RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1_VCORANGE_WIDE;
   RCC_OscInitStruct.PLL.PLLFRACN = 0;
   if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
@@ -148,23 +153,27 @@ WEAK void SystemClock_Config(void)
     Error_Handler();
   }
 
+  /** Configure the programming delay
+  */
+  __HAL_FLASH_SET_PROGRAM_DELAY(FLASH_PROGRAMMING_DELAY_2);
+
   /* Initializes the peripherals clock */
-  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_ADCDAC | RCC_PERIPHCLK_LPUART1
-                                             | RCC_PERIPHCLK_USB;
-  PeriphClkInitStruct.PLL2.PLL2Source = RCC_PLL2_SOURCE_HSE;
-  PeriphClkInitStruct.PLL2.PLL2M = 2;
-  PeriphClkInitStruct.PLL2.PLL2N = 31;
-  PeriphClkInitStruct.PLL2.PLL2P = 2;
-  PeriphClkInitStruct.PLL2.PLL2Q = 12;
+  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB | RCC_PERIPHCLK_ADCDAC
+                                             | RCC_PERIPHCLK_LPUART1;
+  PeriphClkInitStruct.PLL2.PLL2Source = RCC_PLL2_SOURCE_CSI;
+  PeriphClkInitStruct.PLL2.PLL2M = 1;
+  PeriphClkInitStruct.PLL2.PLL2N = 36;
+  PeriphClkInitStruct.PLL2.PLL2P = 3;
+  PeriphClkInitStruct.PLL2.PLL2Q = 4;
   PeriphClkInitStruct.PLL2.PLL2R = 3;
-  PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2_VCIRANGE_3;
+  PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2_VCIRANGE_2;
   PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2_VCORANGE_WIDE;
-  PeriphClkInitStruct.PLL2.PLL2FRACN = 2048;
-  PeriphClkInitStruct.PLL2.PLL2ClockOut = RCC_PLL2_DIVQ | RCC_PLL2_DIVR;
+  PeriphClkInitStruct.PLL2.PLL2FRACN = 0;
+  PeriphClkInitStruct.PLL2.PLL2ClockOut = RCC_PLL2_DIVP | RCC_PLL2_DIVQ
+                                          | RCC_PLL2_DIVR;
   PeriphClkInitStruct.Lpuart1ClockSelection = RCC_LPUART1CLKSOURCE_PLL2Q;
   PeriphClkInitStruct.AdcDacClockSelection = RCC_ADCDACCLKSOURCE_PLL2R;
-  PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48;
-
+  PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL2Q;
   if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
     Error_Handler();
   }