EoL note for 2B #4231
EoL note for 2B #4231
Conversation
documentation/asciidoc/computers/raspberry-pi/introduction.adoc
Outdated
Show resolved
Hide resolved
|
Oh, I guess this PR ought to update https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#flagship-series too 🙂 |
That is the section it updates. |
Co-authored-by: Andrew Scheller <[email protected]>
documentation/asciidoc/computers/raspberry-pi/introduction.adoc
Outdated
Show resolved
Hide resolved
Oooooppps!!! 🤦♂️ 🤦 Maybe I was confusing it with the CM3 EoL stuff? 🙃 I guess that Pi 2B is so low-volume that it's probably not worth updating https://www.raspberrypi.com/documentation/computers/processors.html ? |
I did the same thing. |
| == BCM2837 | ||
|
|
||
| This is the Broadcom chip used in the Raspberry Pi 3 Model B, later models of the Raspberry Pi 2 Model B, and the Raspberry Pi Compute Module 3. The underlying architecture of the BCM2837 is identical to the BCM2836. The only significant difference is the replacement of the Armv7 quad core cluster with a quad-core Arm Cortex A53 (Armv8) cluster. | ||
| This is the Broadcom chip used in Raspberry Pi 3 Model B, some models of Raspberry Pi 2 Model B, Raspberry Pi Compute Module 3, and Raspberry Pi Compute Module 3 Lite. The underlying architecture of the BCM2837 is identical to the BCM2836. The only significant difference is the replacement of the Armv7 quad core cluster with a quad-core Arm Cortex A53 (Armv8) cluster. |
There was a problem hiding this comment.
"Raspberry Pi Compute Module 3, and Raspberry Pi Compute Module 3 Lite" - I'm not sure if we need to differentiate between these here? The CM3L is just a CM3 without an eMMC chip soldered to it.
| * https://datasheets.raspberrypi.com/bcm2836/bcm2836-peripherals.pdf[BCM2836 ARM-local peripherals] | ||
| * https://developer.arm.com/documentation/ddi0464/f/[Cortex-A7 MPcore Processor Reference Manual] | ||
| IMPORTANT: This SoC is discontinued. Raspberry Pi devices that include this chip reached End-of-Life on 16 October 2025. For more information, see https://pip.raspberrypi.com/documents/RP-009284-PC-2?disposition=inline[Raspberry Pi 2 Model B revisions 1.1 and 1.2 Obsolescence Notice 1]. |
There was a problem hiding this comment.
It's the BCM2837 that became EoL on 16 October 2025, the BCM2836 became EoL much earlier. See https://pip-assets.raspberrypi.com/documents/RP-004577-PC-1
| == BCM2837B0 | ||
|
|
||
| This is the Broadcom chip used in the Raspberry Pi 3 Models A+, B+, and the Raspberry Pi Compute Module 3+. The underlying architecture of the BCM2837B0 is identical to the BCM2837 chip used in other versions of the Raspberry Pi. The Arm core hardware is the same, only the frequency is rated higher. | ||
| This is the Broadcom chip used in the later models of the Raspberry Pi 2 Model B, Raspberry Pi 3 Models A+, B+, and the Raspberry Pi Compute Module 3+. The underlying architecture of the BCM2837B0 is identical to the BCM2837 chip used in other versions of the Raspberry Pi. The Arm core hardware is the same, only the frequency is rated higher. |
There was a problem hiding this comment.
| This is the Broadcom chip used in the later models of the Raspberry Pi 2 Model B, Raspberry Pi 3 Models A+, B+, and the Raspberry Pi Compute Module 3+. The underlying architecture of the BCM2837B0 is identical to the BCM2837 chip used in other versions of the Raspberry Pi. The Arm core hardware is the same, only the frequency is rated higher. | |
| This is the Broadcom chip used in the later models of Raspberry Pi 2 Model B, Raspberry Pi 3 Models A+, B+, and Raspberry Pi Compute Module 3+. The underlying architecture of the BCM2837B0 is identical to the BCM2837 chip used in other versions of the Raspberry Pi. The Arm core hardware is the same, only the frequency is rated higher. |
| *Model A* indicates a lower-cost model in a smaller form factor with no Ethernet port, reduced RAM, and fewer USB ports to limit board height. | ||
|
|
||
| IMPORTANT: Raspberry Pi 2 Model B revisions 1.1 and 1.2 have reached End-of-Life (EoL) due to the discontinuation of the core SoC used in these products. The official EoL date was 16 October 2025. Raspberry Pi 2 Model B revision 1.3 offers the same mechanical footprint, improved thermal design, and a BCM2837B0 processor, and so is recommended for existing designs. For more information, see the official https://pip.raspberrypi.com/documents/RP-009284-PC-2[Obsolescence Notice]. | ||
| IMPORTANT: Raspberry Pi 2 Model B revisions 1.1 and 1.2 have reached End-of-Life (EoL) due to the discontinuation of the core SoC used in these products. The official EoL date was 16 October 2025. Raspberry Pi 2 Model B revision 1.3 offers the same mechanical footprint and a BCM2837B0 processor, and so is recommended for existing designs. For more information, see the official https://pip.raspberrypi.com/documents/RP-009284-PC-2?disposition=inline[Obsolescence Notice]. |
There was a problem hiding this comment.
I think that @mudge told me that you can leave off the ?disposition=inline as long as the URL starts with /documents/... ?
| This is the Broadcom chip used in the Raspberry Pi 3 Models A+, B+, and the Raspberry Pi Compute Module 3+. The underlying architecture of the BCM2837B0 is identical to the BCM2837 chip used in other versions of the Raspberry Pi. The Arm core hardware is the same, only the frequency is rated higher. | ||
| This is the Broadcom chip used in the later models of the Raspberry Pi 2 Model B, Raspberry Pi 3 Models A+, B+, and the Raspberry Pi Compute Module 3+. The underlying architecture of the BCM2837B0 is identical to the BCM2837 chip used in other versions of the Raspberry Pi. The Arm core hardware is the same, only the frequency is rated higher. | ||
|
|
||
| The Arm cores are capable of running at up to 1.4GHz, making the 3B+/3A+ about 17% faster than the original Raspberry Pi 3. The VideoCore IV runs at 400MHz. The Arm core is 64-bit, while the VideoCore IV is 32-bit. |
There was a problem hiding this comment.
Probably not worth mentioning that Raspberry Pi Compute Module 3+ and Raspberry Pi 2 Model B rev 1.3 only run the Arm cores at up to 1.2 GHz?
No description provided.