Anet A8 electronics enclosure

Enclosure for the Anet A8 electronics I am designing. Designed to be printed on the same printer and use the least additional hardware possible

TODO

add clips to the outside honeycomb enclosure for grabbing the frame of the printer
try to save any space possible to make the honeycomb enclosure a little lower (faster to print)
think about cable management
THINK ABOUT CABLE MANAGEMENT
make clips for PCBs a little higher than PCB itself to produce better results when printing (account for tolerances and stuff)
move clips for PCBs to suit accordingly. Try and make it as parametric as possible to be able to change the design easily

Name		Name	Last commit message	Last commit date
Latest commit History 10 Commits
416j8EVjysL.jpg		416j8EVjysL.jpg
RAMPSCase.scad		RAMPSCase.scad
README.md		README.md
Raspberry-Pi-1-2-3-Model-B.jpg		Raspberry-Pi-1-2-3-Model-B.jpg
anet_a8.stl		anet_a8.stl
anet_a8_whole.stl		anet_a8_whole.stl
anet_honeycomb_enclosure.scad		anet_honeycomb_enclosure.scad
base.scad		base.scad
base.stl		base.stl
big_mosfet.stl		big_mosfet.stl
big_mosfet_clip.stl		big_mosfet_clip.stl
board_clip.scad		board_clip.scad
clip.scad		clip.scad
clips.factory		clips.factory
clips.stl		clips.stl
electronics_enclosure.scad		electronics_enclosure.scad
example.scad		example.scad
fan.scad		fan.scad
honeycomb.scad		honeycomb.scad
honeycomb_2.scad		honeycomb_2.scad
honeycomb_cover.stl		honeycomb_cover.stl
idea.txt		idea.txt
linear_extrude_try.scad		linear_extrude_try.scad
mega.stl		mega.stl
nema17.scad		nema17.scad
pin2.scad		pin2.scad
ramps.stl		ramps.stl
ramps_holder.stl		ramps_holder.stl
raspberry_pi.stl		raspberry_pi.stl
ruler.scad		ruler.scad
small_mosfet.stl		small_mosfet.stl
small_mosfet_clips.stl		small_mosfet_clips.stl
thingiverse_enclosure.scad		thingiverse_enclosure.scad
walls.scad		walls.scad
walls.stl		walls.stl