Skip to content
Draft
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion openthread_border_router/README.md
Original file line number Diff line number Diff line change
Expand Up @@ -4,7 +4,7 @@ OpenThread Border Router app (formerly known as add-on). The app uses the upstre
Border Router implementation and wraps it as an app for Home Assistant.

**NOTE:** This requires a supported 802.15.4 capable radio with OpenThread
RCP firmware. If you are using [Home Assistant Yellow](https://www.home-assistant.io/yellow/) or [Home Assistant Connect ZBT-1](https://www.home-assistant.io/connectzbt1/) (previously called SkyConnect) then
RCP firmware. If you are using [Home Assistant Yellow](https://www.home-assistant.io/yellow/), [Home Assistant Connect ZBT-1](https://www.home-assistant.io/connectzbt1/) (previously called SkyConnect), and [Home Assistant Connect ZBT-2](https://www.home-assistant.io/connect/zbt-2/) then

Copy link
Copy Markdown
Member

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hm, this comment was initially written when the app flashed the firmware automatically. But this got removed with #4061 from the app.

So either we remove this from the README.md entirely, or we state at least that Core is able to flash the firmware for this hardware.

@puddly thoughts?

the correct firmware is automatically installed.

![Supports aarch64 Architecture][aarch64-shield]
Expand Down