Skip to content

Update of all variant files to add BAT_VOLT_PIN for all variants that define a battery voltage pin #11954

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Merged
merged 2 commits into from
Oct 27, 2025
+77 −18
Merged

Update of all variant files to add BAT_VOLT_PIN for all variants that define a battery voltage pin #11954

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
2 commits
Select commit Hold shift + click to select a range
0730fab
Add BAT_VOLT_PIN for all variants that define a battery voltage pin w…
mitra42 Oct 27, 2025
3367ccf
ci(pre-commit): Apply automatic fixes
pre-commit-ci-lite[bot] Oct 27, 2025
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
1 change: 1 addition & 0 deletions variants/Bee_Data_Logger/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -60,6 +60,7 @@ static const uint8_t T14 = 14;

static const uint8_t BOOT_BTN = 0;
static const uint8_t VBAT_VOLTAGE = 1;
#define BAT_VOLT_PIN VBAT_VOLTAGE
static const uint8_t VBUS_SENSE = 2;
static const uint8_t LDO2 = 34;
static const uint8_t RGB_DATA = 40;
Expand Down
1 change: 1 addition & 0 deletions variants/Bee_Motion_S3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -66,6 +66,7 @@ static const uint8_t T14 = 14;

static const uint8_t BOOT_BTN = 0;
static const uint8_t VBAT_VOLTAGE = 1;
#define BAT_VOLT_PIN VBAT_VOLTAGE
static const uint8_t VBUS_SENSE = 2;
static const uint8_t PIR = 4;
static const uint8_t LIGHT = 3;
Expand Down
1 change: 1 addition & 0 deletions variants/Bee_S3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -58,6 +58,7 @@ static const uint8_t T9 = 9;
static const uint8_t T10 = 10;

static const uint8_t VBAT_VOLTAGE = 1;
#define BAT_VOLT_PIN VBAT_VOLTAGE

static const uint8_t RGB_DATA = 48;
static const uint8_t RGB_PWR = 34;
Expand Down
3 changes: 2 additions & 1 deletion variants/Pcbcupid_GLYPH_C3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,8 @@ static const uint8_t LED_BUILTIN = 1;

//MSR Used in on-board battery measurement
static const uint8_t BAT_MEASURE = 0;
#define MSR BAT_MEASURE
#define BAT_VOLT_PIN BAT_MEASURE
#define MSR BAT_MEASURE

static const uint8_t TX = 21;
static const uint8_t RX = 20;
Expand Down
3 changes: 2 additions & 1 deletion variants/Pcbcupid_GLYPH_C6/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,8 @@ static const uint8_t LED_BUILTIN = 14;

//MSR Used in on-board battery measurement
static const uint8_t BAT_MEASURE = 0;
#define MSR BAT_MEASURE
#define BAT_VOLT_PIN BAT_MEASURE
#define MSR BAT_MEASURE

static const uint8_t TX = 16;
static const uint8_t RX = 17;
Expand Down
3 changes: 2 additions & 1 deletion variants/Pcbcupid_GLYPH_H2/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,8 @@ static const uint8_t LED_BUILTIN = 0;

//MSR Used in on-board battery measurement
static const uint8_t BAT_MEASURE = 1;
#define MSR BAT_MEASURE
#define BAT_VOLT_PIN BAT_MEASURE
#define MSR BAT_MEASURE

static const uint8_t TX = 24;
static const uint8_t RX = 23;
Expand Down
1 change: 1 addition & 0 deletions variants/XIAO_ESP32S3_Plus/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -55,6 +55,7 @@ static const uint8_t A8 = 7;
static const uint8_t A9 = 8;
static const uint8_t A10 = 9;
static const uint8_t ADC_BAT = 10;
#define BAT_VOLT_PIN ADC_BAT

static const uint8_t D0 = 1;
static const uint8_t D1 = 2;
Expand Down
1 change: 1 addition & 0 deletions variants/adafruit_camera_esp32s3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -43,6 +43,7 @@ static const uint8_t MISO = 37;
static const uint8_t A0 = 17;
static const uint8_t A1 = 18;
static const uint8_t BATT_MONITOR = 4;
#define BAT_VOLT_PIN BATT_MONITOR
static const uint8_t SHUTTER_BUTTON = 0;

static const uint8_t TX = 43;
Expand Down
1 change: 1 addition & 0 deletions variants/adafruit_feather_esp32_v2/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -35,6 +35,7 @@ static const uint8_t A13 = 35;

// vbat measure
#define BATT_MONITOR 35
#define BAT_VOLT_PIN BATT_MONITOR

// internal switch
#define BUTTON 38
Expand Down
1 change: 1 addition & 0 deletions variants/adafruit_magtag29_esp32s2/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -44,6 +44,7 @@ static const uint8_t BUTTON_D = PIN_BUTTON4;

static const uint8_t LIGHT_SENSOR = 3;
static const uint8_t BATT_MONITOR = 4;
#define BAT_VOLT_PIN BATT_MONITOR
static const uint8_t SPEAKER_SHUTDOWN = 16;

static const uint8_t SDA = 33;
Expand Down
1 change: 1 addition & 0 deletions variants/cyobot_v2_esp32s3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,7 @@ static const uint8_t BUTTON1 = 38;
static const uint8_t LED = 24;

static const uint8_t BAT_MEAS = 6;
#define BAT_VOLT_PIN BAT_MEAS
static const uint8_t CHAR_DET = 23;

static const uint8_t NEO_BASE = 7;
Expand Down
1 change: 1 addition & 0 deletions variants/cytron_maker_feather_aiot_s3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -29,6 +29,7 @@ static const uint8_t RGB_BUILTIN = SOC_GPIO_PIN_COUNT + 46; // RGB LED.

#define VIN 13 // Vin Sense.
#define VBATT 13
#define BAT_VOLT_PIN VBATT
#define VOLTAGE_MONITOR 13

static const uint8_t TX = 15;
Expand Down
1 change: 1 addition & 0 deletions variants/d1_mini32/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,6 +8,7 @@ static const uint8_t LED_BUILTIN = 2;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN
static const uint8_t _VBAT = 35; // battery voltage
#define BAT_VOLT_PIN _VBAT

#define PIN_WIRE_SDA SDA // backward compatibility
#define PIN_WIRE_SCL SCL // backward compatibility
Expand Down
1 change: 1 addition & 0 deletions variants/d32/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -8,5 +8,6 @@ static const uint8_t LED_BUILTIN = 5;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN
static const uint8_t _VBAT = 35; // battery voltage
#define BAT_VOLT_PIN _VBAT

#endif /* Pins_Arduino_h */
1 change: 1 addition & 0 deletions variants/d32_pro/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,7 @@ static const uint8_t LED_BUILTIN = 5;
#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN

static const uint8_t _VBAT = 35; // battery voltage
#define BAT_VOLT_PIN _VBAT

#define TF_CS 4 // TF (Micro SD Card) CS pin
#define TS_CS 12 // Touch Screen CS pin
Expand Down
1 change: 1 addition & 0 deletions variants/deneyapkart1Av2/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -102,5 +102,6 @@ static const uint8_t SDCS = 11;
static const uint8_t SDCK = 13;

static const uint8_t BAT = 9;
#define BAT_VOLT_PIN BAT

#endif /* Pins_Arduino_h */
1 change: 1 addition & 0 deletions variants/deneyapkartv2/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -119,5 +119,6 @@ static const uint8_t SDCK = 13;
static const uint8_t SDDA = 14;

static const uint8_t BAT = 3;
#define BAT_VOLT_PIN BAT

#endif /* Pins_Arduino_h */
1 change: 1 addition & 0 deletions variants/esp32c3-devkit-lipo/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -28,6 +28,7 @@ static const uint8_t SCK = 4;
//static const uint8_t PWR_SENSE = 4;
// battery measurement - disabled by default - check the schematic
//static const uint8_t BAT_SENSE = 3;
// #define BAT_VOLT_PIN BAT_SENSE
static const uint8_t A0 = 0;
static const uint8_t A1 = 1;
static const uint8_t A2 = 2;
Expand Down
1 change: 1 addition & 0 deletions variants/esp32micromod/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -25,6 +25,7 @@ static const uint8_t SCK = 18;
static const uint8_t A0 = 34;
static const uint8_t A1 = 35;
static const uint8_t BATT_VIN = 39;
#define BAT_VOLT_PIN BATT_VIN

static const uint8_t PWM0 = 13;
static const uint8_t PWM1 = 12;
Expand Down
1 change: 1 addition & 0 deletions variants/esp32s2-devkit-lipo-usb/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -27,6 +27,7 @@ static const uint8_t SCK = 36;
//static const uint8_t PWR_SENSE = 7;
// battery measurement - disabled by default - check the schematic
//static const uint8_t BAT_SENSE = 8;
// #define BAT_VOLT_PIN BAT_SENSE

static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
Expand Down
1 change: 1 addition & 0 deletions variants/esp32s2-devkit-lipo/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -29,6 +29,7 @@ static const uint8_t SCK = 36;
//static const uint8_t PWR_SENSE = 7;
// battery measurement - disabled by default - check the schematic
//static const uint8_t BAT_SENSE = 8;
// #define BAT_VOLT_PIN BAT_SENSE

static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
Expand Down
1 change: 1 addition & 0 deletions variants/esp32s3-devkit-lipo/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -35,6 +35,7 @@ static const uint8_t SCK = 12;
static const uint8_t PWR_SENSE = 5;
// battery measurement
static const uint8_t BAT_SENSE = 6;
#define BAT_VOLT_PIN BAT_SENSE

static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
Expand Down
1 change: 1 addition & 0 deletions variants/esp32s3usbotg/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -68,6 +68,7 @@ static const uint8_t T3 = 3;
#define OVER_CURRENT 21 // Current overrun signal, high level means overrun.
#define HOST_VOLTS 1 // USB_DEV voltage monitoring, ADC1 channel 0. actual_v = value_v * 3.7
#define BAT_VOLTS 2 // Battery voltage monitoring, ADC1 channel 1. actual_v = value_v * 2
#define BAT_VOLT_PIN BAT_VOLTS

// USB Port
#define USB_DN 19 // USB D-
Expand Down
1 change: 1 addition & 0 deletions variants/feather_esp32/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -38,6 +38,7 @@ static const uint8_t A12 = 13;

// vbat measure
static const uint8_t BATT_MONITOR = 35;
#define BAT_VOLT_PIN BATT_MONITOR
static const uint8_t A13 = 35;
//static const uint8_t Ax = 0; // not used/available
//static const uint8_t Ax = 2; // not used/available
Expand Down
1 change: 1 addition & 0 deletions variants/fed4/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -51,6 +51,7 @@ static const uint8_t T6 = 6;

static const uint8_t BOOT_BTN = 0;
static const uint8_t VBAT_VOLTAGE = 7;
#define BAT_VOLT_PIN VBAT_VOLTAGE
static const uint8_t LDO2 = 47;
static const uint8_t STATUS_RGB = 35;
static const uint8_t RGB_STRIP = 36;
Expand Down
3 changes: 2 additions & 1 deletion variants/fobe_quill_esp32s3_mesh/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -17,7 +17,8 @@
/*
* Battery
*/
#define PIN_VBAT (10)
#define PIN_VBAT (10)
#define BAT_VOLT_PIN PIN_VBAT

/*
* Buttons
Expand Down
1 change: 1 addition & 0 deletions variants/fri3d_2024_esp32s3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -35,6 +35,7 @@ static const uint8_t SCK = 7;
#define PIN_BLASTER 10
#define PIN_BUZZER 46
#define PIN_BATTERY 13
#define BAT_VOLT_PIN PIN_BATTERY

#define PIN_SDCARD_CS SS

Expand Down
1 change: 1 addition & 0 deletions variants/heltec_capsule_sensor_v3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -76,6 +76,7 @@ static const uint8_t GPS_RESET_PIN = 3;
static const uint8_t GPS_PPS_PIN = 1;

static const uint8_t ADC_BATTERY_PIN = 7;
#define BAT_VOLT_PIN ADC_BATTERY_PIN
static const uint8_t ADC_BATTERY_CTRL_PIN = 36;

static const uint8_t RST_LoRa = 12;
Expand Down
1 change: 1 addition & 0 deletions variants/lilygo_t3_s3_lr1121/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;

static const uint8_t BUTTON_1 = 0;
static const uint8_t BAT_VOLT = 1;
#define BAT_VOLT_PIN BAT_VOLT

static const uint8_t TX = 43;
static const uint8_t RX = 44;
Expand Down
1 change: 1 addition & 0 deletions variants/lilygo_t3_s3_sx1262/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;

static const uint8_t BUTTON_1 = 0;
static const uint8_t BAT_VOLT = 1;
#define BAT_VOLT_PIN BAT_VOLT

static const uint8_t TX = 43;
static const uint8_t RX = 44;
Expand Down
1 change: 1 addition & 0 deletions variants/lilygo_t3_s3_sx127x/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;

static const uint8_t BUTTON_1 = 0;
static const uint8_t BAT_VOLT = 1;
#define BAT_VOLT_PIN BAT_VOLT

static const uint8_t TX = 43;
static const uint8_t RX = 44;
Expand Down
1 change: 1 addition & 0 deletions variants/lilygo_t3_s3_sx1280/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;

static const uint8_t BUTTON_1 = 0;
static const uint8_t BAT_VOLT = 1;
#define BAT_VOLT_PIN BAT_VOLT

static const uint8_t TX = 43;
static const uint8_t RX = 44;
Expand Down
1 change: 1 addition & 0 deletions variants/lilygo_t3_s3_sx1280pa/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;

static const uint8_t BUTTON_1 = 0;
static const uint8_t BAT_VOLT = 1;
#define BAT_VOLT_PIN BAT_VOLT

static const uint8_t TX = 43;
static const uint8_t RX = 44;
Expand Down
1 change: 1 addition & 0 deletions variants/lilygo_t_display/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -52,6 +52,7 @@ static const uint8_t DAC1 = 25;
static const uint8_t DAC2 = 26;

static const uint8_t VBAT = 34;
#define BAT_VOLT_PIN VBAT

static const uint8_t RIGHT_BUTTON = 35;
static const uint8_t LEFT_BUTTON = 0;
Expand Down
1 change: 1 addition & 0 deletions variants/lilygo_t_display_s3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,7 @@
static const uint8_t BUTTON_1 = 0;
static const uint8_t BUTTON_2 = 14;
static const uint8_t BAT_VOLT = 4;
#define BAT_VOLT_PIN BAT_VOLT

static const uint8_t TX = 43;
static const uint8_t RX = 44;
Expand Down
1 change: 1 addition & 0 deletions variants/lolin_c3_pico/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -25,6 +25,7 @@ static const uint8_t SDA = 8;
static const uint8_t SCL = 10;

static const uint8_t VBAT = 3;
#define BAT_VOLT_PIN VBAT

static const uint8_t SCK = 1;
static const uint8_t MISO = 0;
Expand Down
1 change: 1 addition & 0 deletions variants/oroca_edubot/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -35,6 +35,7 @@ static const uint8_t D8 = 33;

// vbat measure
static const uint8_t VBAT = 35;
#define BAT_VOLT_PIN VBAT

static const uint8_t T0 = 4;
static const uint8_t T1 = 0;
Expand Down
1 change: 1 addition & 0 deletions variants/rakwireless_rak3112/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -19,6 +19,7 @@ static const uint8_t LED_BUILTIN = LED_GREEN;
#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN

static const uint8_t BAT_VOLT = 21;
#define BAT_VOLT_PIN BAT_VOLT

static const uint8_t TX = 43;
static const uint8_t RX = 44;
Expand Down
15 changes: 8 additions & 7 deletions variants/roboheart_hercules/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -29,13 +29,14 @@
#define TXD1 17

// GSM Vela connector board pins
#define GSM_PWRKEY 12
#define GSM_DTR 13
#define GSM_CTS 15
#define GSM_RTS 14
#define GSM_TX TXD1
#define GSM_RX RXD1
#define BATTERY_PIN 36 // Battery ADC pin
#define GSM_PWRKEY 12
#define GSM_DTR 13
#define GSM_CTS 15
#define GSM_RTS 14
#define GSM_TX TXD1
#define GSM_RX RXD1
#define BATTERY_PIN 36 // Battery ADC pin
#define BAT_VOLT_PIN BATTERY_PIN

static const uint8_t TX = 35;
static const uint8_t RX = 34;
Expand Down
1 change: 1 addition & 0 deletions variants/tamc_termod_s3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -57,6 +57,7 @@ static const uint8_t T13 = 13;
static const uint8_t T14 = 14;

static const uint8_t BAT_LV = 1;
#define BAT_VOLT_PIN BAT_LV
static const uint8_t CHG = 2;
static const uint8_t TFT_CS = 10;
static const uint8_t TFT_DC = 18;
Expand Down
1 change: 1 addition & 0 deletions variants/thingpulse_epulse_feather/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -32,6 +32,7 @@ static const uint8_t A12 = 13;

// vbat measure
static const uint8_t BATT_MONITOR = 35; // Note: voltage divider 2.2M/4.7M
#define BAT_VOLT_PIN BATT_MONITOR
static const uint8_t A13 = 35;
//static const uint8_t Ax = 0; // not used/available
//static const uint8_t Ax = 2; // not used/available? GPIO02 is available!
Expand Down
1 change: 1 addition & 0 deletions variants/ttgo-t-oi-plus/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -23,5 +23,6 @@ static const uint8_t A2 = 4;
static const uint8_t A3 = 5;

static const uint8_t BAT_ADC_PIN = 2;
#define BAT_VOLT_PIN BAT_ADC_PIN

#endif /* Pins_Arduino_h */
1 change: 1 addition & 0 deletions variants/uPesy_esp32c3_basic/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -28,5 +28,6 @@ static const uint8_t A4 = 4;
static const uint8_t A5 = 5;

static const uint8_t VBAT_SENSE = 0;
#define BAT_VOLT_PIN VBAT_SENSE

#endif /* Pins_Arduino_h */
1 change: 1 addition & 0 deletions variants/uPesy_esp32c3_mini/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -27,5 +27,6 @@ static const uint8_t A4 = 4;
static const uint8_t A5 = 5;

static const uint8_t VBAT_SENSE = 0;
#define BAT_VOLT_PIN VBAT_SENSE

#endif /* Pins_Arduino_h */
1 change: 1 addition & 0 deletions variants/um_bling/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -52,6 +52,7 @@ static const uint8_t BUTTON_C = 33;
static const uint8_t BUTTON_D = 34;

static const uint8_t VBAT_SENSE = 17;
#define BAT_VOLT_PIN VBAT_SENSE
static const uint8_t VBUS_SENSE = 16;

static const uint8_t I2S_MIC_SEL = 39;
Expand Down
1 change: 1 addition & 0 deletions variants/um_feathers2neo/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -65,6 +65,7 @@ static const uint8_t LED_BUILTIN = RGB_BUILTIN;
static const uint8_t NEOPIXEL_PWR = 39;

static const uint8_t VBAT_SENSE = 2;
#define BAT_VOLT_PIN VBAT_SENSE
static const uint8_t VBUS_SENSE = 34;

#endif /* Pins_Arduino_h */
1 change: 1 addition & 0 deletions variants/um_feathers3/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -54,6 +54,7 @@ static const uint8_t T12 = 12;
static const uint8_t T14 = 14;

static const uint8_t VBAT_SENSE = 2;
#define BAT_VOLT_PIN VBAT_SENSE
static const uint8_t VBUS_SENSE = 34;

// User LED
Expand Down
1 change: 1 addition & 0 deletions variants/um_feathers3neo/pins_arduino.h
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -50,6 +50,7 @@ static const uint8_t T12 = 12;
static const uint8_t T14 = 14;

static const uint8_t VBAT_SENSE = 2;
#define BAT_VOLT_PIN VBAT_SENSE
static const uint8_t VBUS_SENSE = 15;

// User LED
Expand Down
Loading