NOEMA RNSGate Lite — a gateway for the Reticulum network, combining LoRa radio, the LXMF messenger, MQTT integration with Home Assistant, the anonymous I2P network, Nomadnet, and a modern web management interface.
🔬 Want more? Check out NOEMA RNSGate FULL — the version with Radio Observatory: real RSSI/SNR/Noise data from RNode, network map with hop rings, RF packet log, interference detection and browser terminal.
- Reticulum Mesh (TCP/IP + LoRa via RNode)
- LXMF Bridge → MQTT → Home Assistant
- Built-in P2P chat (LXMF) with notifications and attachments
- Access Control: LXMF address whitelisting and rate limiting against spam
- Telegram notifications for incoming messages
- Anonymous I2P network (connect gateways without a public IP)
- Nomadnet Node + page editor + IRC-style chat
- rBrowser — built-in Nomadnet browser
- Modern web dashboard (light/dark theme): monitoring, service management, config editor without SSH
- Backup & Restore for all identities and data
- One-click update from GitHub right in the dashboard
This project was built for personal use and is distributed as-is, with no guarantee of functionality. Basic knowledge required: Linux, TCP/IP, MQTT, general system administration.
Requirements: Debian/Ubuntu, Python 3.10+, root.
git clone https://github.com/e2ret/NOEMA-RNSGate-Lite.git && cd NOEMA-RNSGate-Lite && sudo bash install.shThe script automatically installs all dependencies and starts the systemd services. During installation you'll be asked two things:
- MQTT broker — host/IP, port, username, and password (for LXMF Bridge → Home Assistant). If you don't have a broker yet, just press Enter to keep the defaults (
localhost) and configure it later via [[Configs]] in the dashboard. - Nomadnet node name — how your gateway will appear to other nodes in the network's announces. Defaults to
NOEMA RNSGate (hostname)— fine if you're only running one gateway; if you're planning to run several, it's worth picking clear names right away (e.g.NOEMA Home,NOEMA Cabin) to tell them apart on the network. This can also be changed later in the dashboard, under [[Nomadnet]].
Note: during installation you'll need to press Enter twice — for Nomadnet initialization and cron setup.
Once installed, the dashboard is available in your browser on port 8081:
http://GATEWAY_IP:8081
Find the device's IP in your router's client list, or via hostname -I over SSH on the gateway itself. No authentication is required by default — the dashboard is open to anyone on the local network.
The project is not tied to Orange Pi — that's just the device it was tested on. All you really need is any Linux (Debian/Ubuntu) with Python 3.10+:
- Single-board computers: Orange Pi Zero/Zero 2/Zero 3, Raspberry Pi (any model with Ubuntu/Debian)
- VM/LXC on Proxmox: any Debian/Ubuntu container or VM — this is how the author runs it
- Old laptop / mini-PC: x86_64 with Ubuntu Server
- VPS: if you need a public TCP node without a home network
RNode connects either via USB or Wi-Fi (for ESP32-based models with a network interface) — a physical USB port is only required for the USB variant. Everything else (TCP/Wi-Fi/Ethernet mesh, I2P, MQTT, chat) runs on any VM with no physical hardware access at all.
Minimum requirements: ~256 MB RAM, ~2 GB disk for a full install.
→ Full documentation in the Wiki
- Reticulum (RNS) — Mark Qvist, MIT
- LXMF — Mark Qvist, MIT
- Nomadnet — Mark Qvist, GPL-3.0
- lxmfy — lxmfy, MIT
- Flask — Pallets, BSD
- paho-mqtt — Eclipse, EPL/EDL
- rBrowser — fr33n0w, MIT
- i2pd — PurpleI2P, BSD
Mark Qvist — Reticulum, LXMF, Nomadnet · fr33n0w — rBrowser · PurpleI2P Team — i2pd
Thanks to all the developers who keep the Reticulum ecosystem growing.
If you find this useful, donations are welcome.
If you find this useful, donations are welcome.
TD89XXL9ehwhp4WysfqHSBGJjxxdoaVsYD
UQCmROnKeaWIt5Uxu3MTebKUjYQHuvVeyOauWdVn6srUWKX8