You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
Generic eMMC Flasher fails on newest BBone-Images (Ubuntu) #135
ubuntu@ubuntu:~$ sudo enable-beagle-flasher
log: enable-beagle-flasher
log: media is now setup to flash other media
log: Shutdown system and this flasher will run on next startup
While the 'flasher' is running, this is the most important bits:
--------------------------------------------------------------------------------
INFO: Preparing sysctl
INFO: [sysctl: vm.min_free_kbytes=[2780]
INFO: [sysctl: setting: [sysctl -w vm.min_free_kbytes=16384]
vm.min_free_kbytes = 16384
--------------------------------------------------------------------------------
INFO: [lsblk -i]
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
mmcblk1 179:0 0 3.6G 0 disk
mmcblk1boot0 179:256 0 4M 1 disk
mmcblk1boot1 179:512 0 4M 1 disk
mmcblk0 179:768 0 29.8G 0 disk
`-mmcblk0p1 179:769 0 29.8G 0 part /
--------------------------------------------------------------------------------
INFO: copying [/dev/mmcblk0] -> [/dev/mmcblk1]
--------------------------------------------------------------------------------
Thanks for the feedback! I had a a chance to try this on a bunch of BBone Green - PCB version 1.0. Four of them are 3y old, but untouched & fresh out of the box. Two were older. All 6 failed / hang with the activated flasher.
Activity
RobertCNelson commentedon Oct 2, 2023
@orgua pretty sure i debugged this last week.. what's the output of:
Import bits are: (Black Wireless is in my test lab)
enable flasher..
While the 'flasher' is running, this is the most important bits:
Regards,
RobertCNelson commentedon Oct 2, 2023
Flasher runs fine...
RobertCNelson commentedon Oct 2, 2023
and rebooted (with microSD)...
orgua commentedon Oct 5, 2023
Thanks for the feedback! I had a a chance to try this on a bunch of BBone Green - PCB version 1.0. Four of them are 3y old, but untouched & fresh out of the box. Two were older. All 6 failed / hang with the activated flasher.
It would be odd if all of these are broken? The eMMC-IC is present though.
Complete Log: