Be able to redefine VDD_VALUE in the default HAL configuration

Signed-off-by: Frederic.Pillon <[email protected]>

Author: fpistm

system/STM32F0xx/stm32f0xx_hal_conf_default.h

@@ -165,7 +165,9 @@ in voltage and temperature.  */
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined(VDD_VALUE)
 #define  VDD_VALUE                    3300U  /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
 #endif

system/STM32F1xx/stm32f1xx_hal_conf_default.h

@@ -142,7 +142,9 @@ extern "C" {
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined(VDD_VALUE)
 #define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
 #endif

system/STM32F2xx/stm32f2xx_hal_conf_default.h

@@ -79,13 +79,13 @@ extern "C" {
 #define HAL_SD_MODULE_ENABLED
 #define HAL_SPI_MODULE_ENABLED
 #define HAL_TIM_MODULE_ENABLED
-#define HAL_UART_MODULE_ENABLED 
-#define HAL_USART_MODULE_ENABLED 
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
 #define HAL_IRDA_MODULE_ENABLED
 #define HAL_SMARTCARD_MODULE_ENABLED
 #define HAL_WWDG_MODULE_ENABLED
 #define HAL_CORTEX_MODULE_ENABLED
-#define HAL_PCD_MODULE_ENABLED 
+#define HAL_PCD_MODULE_ENABLED
 #define HAL_HCD_MODULE_ENABLED
 #define HAL_MMC_MODULE_ENABLED
 #endif
@@ -148,7 +148,9 @@ in voltage and temperature.*/
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                      3300U /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY              0x00U /*!< tick interrupt priority */
 #endif

system/STM32F3xx/stm32f3xx_hal_conf_default.h

@@ -165,7 +165,9 @@ in voltage and temperature.  */
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
 #endif

system/STM32F4xx/stm32f4xx_hal_conf_default.h

@@ -146,7 +146,9 @@ in voltage and temperature. */
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
 #endif

system/STM32F7xx/stm32f7xx_hal_conf_default.h

@@ -146,7 +146,9 @@ in voltage and temperature.  */
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
 #endif

system/STM32G0xx/stm32g0xx_hal_conf_default.h

@@ -148,7 +148,9 @@ in voltage and temperature.*/
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                    (3300UL) /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
 #endif

system/STM32H7xx/stm32h7xx_hal_conf_default.h

@@ -159,7 +159,9 @@ in voltage and temperature.*/
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            ((uint32_t)0x00) /*!< tick interrupt priority */
 #endif

system/STM32L0xx/stm32l0xx_hal_conf_default.h

@@ -139,7 +139,9 @@ in voltage and temperature.*/
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
 #endif

system/STM32L1xx/stm32l1xx_hal_conf_default.h

@@ -129,7 +129,9 @@ in voltage and temperature.*/
 /**
   * @brief This is the HAL system configuration section
   */
+#if !defined (VDD_VALUE)
 #define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
+#endif
 #if !defined (TICK_INT_PRIORITY)
 #define  TICK_INT_PRIORITY            (0x0000U)    /*!< tick interrupt priority */
 #endif