Unable to complete the error test on one out of a batch of Verbatim BD-R XL 100 GB M-Discs

[przemhb]

Recently I have burnt a few BD-R XL 100 GB M-Discs from the same 5-pack. One at 4x and others at 2x. Using WH16NS48 1.D3.
The last one I have burnt causes an issue for the newest QPxTool pl6. It is unable to complete the errors test. I have run the test numerous times and QPxTool always restarts from the beginning after some time. Most of the time it manages to get to about 60GB. Once it got to about 90GB.

[speed47]

Hello,
Restarting from the beginning is indeed a weird behavior, could you try the latest dev release ( https://github.com/speed47/qpxtool/releases/tag/devel ), run a scan, and have a look at the "Console" tab? This should the raw text output of the scan, when it restarts, there might be error messages there that could help

[przemhb]

Hello,

I gave the latest dev release a try and it worked fine. So unfortunately it won't help us. I've tried a few times with different active tabs.
Then I run the released version once again to confirm, the bug is still present. The test confirmed this.

Is there a command line, which I could use to invoke the QPxTool pl6, to make it write log?

[speed47]

If the latest dev version works fine for you, that would be nice, because it'll be released and replace the current release version in a few days, actually!