This repository contains the hardware design files for the SENSEI Debug Board, a dedicated debugging and programming interface designed to facilitate rapid development and prototyping on the SENSEI platform.
The SENSEI Debug Board simplifies the development process, facilitating flashing, debugging, and testing hardware designed around the SENSEI Base Board and its extension shields. Both the base board and any additional shield boards can be directly connected.
- Integrated Debug Interfaces
- Dedicated debug and flash connectors for GAP9, nRF5340, and MSP SoCs.
- Easy Signal and Power Access
- Pin headers provide direct access to all signals and power rails on the board-to-board connectors.
- User-Friendly Interface
- Onboard LEDs and buttons for system status indication and interaction during development and debugging.
- For SENSEI Base Board v1.0, ensure that the GAP9 is connected to the SPI bus (controlled by nRF) to use the JTAG programming header on the Debug Board. Alternatively, the JTAG header on the break-off part of the Base Board can be used.
A changelog is available in the Changelog.md file, which tracks all major updates and revisions to the board's design and documentation.
- Sebastian Frey ([email protected])
- Philip Wiese ([email protected])
This repository makes use of the following licenses:
- for all hardware: Solderpad Hardware License Version 0.51
- for all images: Creative Commons Attribution 4.0 International License][cc-by]
For further information have a look at the license files: LICENSE.hw, LICENSE.images