Trouble getting the additional modes to show.

[Eelyad]

Just trying to get this to work as an ASV and I'm a little lost on the instructions. I tried patching the dumped firmware but it says wrong hash - after changing the hash manually in path-airsense to the one on my machine's firmware and flashing it, it says "HACKED" at the top but the additional modes are not visible. I checked the firmware version before doing this and it is indeed SX567-0401 like the guide states it should be.

Sorry if this isn't the right place for this, I wasn't able to find anywhere else with people knowledgeable about this project.

[jsmith1299]

I am having an issue applying the patch. It says some hash error.

[jsmith1299]

If you haven't figured this out yet you will need to get into the clinical menu by pressing the knob in and the home menu. I was able to get the firmware elsewhere but the hash error I could not figure out.

[Eelyad]

Sadly this is not the case for me. Going into the clinical settings does not reveal the additional modes, it only says CPAP and Autoset.

[0xma1ware]

Unsure if you ever manage to fix it, so leaving the comment for future hackers.

You need to get an alternate source of the firmware and flash that onto the chip (at your own risk).

https://0xma1ware.github.io/posts/cpap-jailbreak.html#what-to-do-if-the-above-fails