Schedule validation

[nickevansuk]

This issue actually likely contains a number of rules, and the various requirements below could be split into different rules in a number of ways. Generally it's better to keep rule files as focussed as possible, with a good separation of concerns between the validation being conducted by each file.

Validate recurrence rule from Schedule

The validator should include a rule that validates that a Schedule contains a valid iCal recurrence rule.

There's already schedule generation logic in the conformance services, so it should be easy to convert this into some validation logic for the same fields, creating an rrule.

Note the logic above does not include scheduleTimezone (which it definitely should), so this will need to be added.

If there are not enough properties to create an rrule (e.g. the rrule library might return an error saying this?), display #292

If the properties do not create a valid rrule, return an error from the rrule library that explains what’s wrong, as a FAILURE

Using the rrule, validate that all exceptDate values are actually part of the recurrence defined by the rrule, and produce a WARNING if any are outside of the rrule.

Also note this other rrule library that has better support for timezones, if the library used above is problematic https://www.npmjs.com/package/@rschedule/core - however it has much lower usage so the rrule library is preferred if possible.

The Bookwhen (http://data.bookwhen.com/) and Open Sessions (https://opensessions.io/openactive) feeds should contain good test data for this.

Validate specific properties within PartialSchedule (target only PartialSchedule)

• validate that if a PartialSchedule includes startTime or endTime, it must also include scheduleTimezone, producing a FAILURE otherwise

Validate specific properties within Schedule (target only Schedule)

• validate that idTemplate and urlTemplate include a {startDate} placeholder, and are valid .

  • A separate generic rule (Support valueConstraint for UriTemplate and UUID #377) that checks the values are valid Uri Templates
  • A specific rule that targets idTemplate and urlTemplate and checks that they both include {startDate}, producing a FAILURE otherwise

• validate that scheduledEventType is a valid Event subclass.

  • This should be achievable using subClassGraph as here, perhaps by loading in the model specified by the value using DataModelHelper, producing a FAILURE if not

Validate specific properties within Schedule and PartialSchedule (target both)

• validate that repeatCount is a positive integer greater than zero

  • This is a separate generic rule (Support minValueInclusive #378), that is applied to both Schedule and PartialSchedule via the data-models

• validate that scheduleTimezone matches a value from the IANA Time Zone Database.

  • A specific rule that targets scheduleTimezone and uses e.g. moment.tz.names() (which requires adding moment-timezone) to validate the entries, producing a FAILURE if the value does not match. Note this is a separate rule from the generic rrule validation as it also applies to PartialSchedule.

Also consider whether extending the below could be an approach to implementing any of the above:

• repeatFrequency must be accompanied by appropriate byDay/byMonth/byMonthDay values #362

See further documentation:

• https://icalendar.org/iCalendar-RFC-5545/3-8-5-3-recurrence-rule.html
• https://developer.openactive.io/publishing-data/schedules

[Lathrisk]

Task list:

• The validator should include a rule that validates that a Schedule contains a valid iCal recurrence rule.

• Using the rrule, validate that all exceptDate values are actually part of the recurrence defined by the rrule, and produce a WARNING if any are outside of the rrule.

• validate that if a PartialSchedule includes startTime or endTime, it must also include scheduleTimezone, producing a FAILURE otherwise

• validate that idTemplate and urlTemplate include a {startDate} placeholder, and are valid .

• A separate generic rule (Support valueConstraint for UriTemplate and UUID #377) that checks the values are valid Uri Templates

• A specific rule that targets idTemplate and urlTemplate and checks that they both include {startDate}, producing a FAILURE otherwise

• validate that scheduledEventType is a valid Event subclass.

• validate that repeatCount is a positive integer greater than zero

• validate that scheduleTimezone matches a value from the IANA Time Zone Database.

[Lathrisk]

@thill-odi @nickevansuk

I've been looking at the RRule validation today and wanted to ask a couple questions. There is very little information required to generate a valid RRule. I think fundamentally it is just a frequency that is required (iCal spec). The requirement for a Schedule from schema.org.

Do we want to raise any warnings or failures in addition to the these requirements, for fields such as startDate/startTIme, or duration? If my understand is correct these fields could surface in other locations in the data? (e.g. courseInstance example

[nickevansuk]

@Lathrisk so we need enough data to generate at least one occurrence when ignoring exceptDate - my understanding is that many properties are only valid in certain value combinations - so perhaps one could try to simply generate the first occurance in the schedule and see if it's possible? So assume in this case yes it will need startDate and startTime

If the schedule does not generate any occurrences it should be a FAILURE

All data used to generate a Schedule must come from within the Schedule only; it is entirely self-contained.

[nickevansuk]

Also, to help with:

Using the rrule, validate that all exceptDate values are actually part of the recurrence defined by the rrule, and produce a WARNING if any are outside of the rrule.

Potential logic as follows for the exceptDate check:

• Generate the schedule using Rule between the earliest and latest exceptDate
• Check all exceptDates are in the schedule

Here's the schedule generation code that imin uses, complete with a working timezone implementation:

https://gist.github.com/lukehesluke/b00a20caf22abf26b38c0c5e3238e150

Note specifically that process.env.TZ must be set when the validator starts in order for RRule to behave as expected in all environments

You won't need all of the code above, but it should give you a good head start here :)

[Lathrisk]

Thanks, @nickevansuk. I had started using rrule with luxon so will take a look at this as a more predictable alternative.

[Lathrisk]

@nickevansuk (cc @thill-odi) I've been working through the timezone code, but I have been trying to understand the reasoning for implementing this as part of this rule. Surely the primary requirement is ensuring that the time, date, and timezone are provided, rather than the specific implementation of the RRule generation that we apply here? The generated recurrence rule is a byproduct of the recommendations in the developer docs, rather than concrete values in the OpenActive data that we need to validate?

Is there something important that I am missing?

[nickevansuk]

Not sure I'm following @Lathrisk - the only reason for the timezone's need to be accurate is for the exceptDate validation (as per #365 (comment)).

So perhaps I've misunderstood? Also should have mentioned previously that if using luxon is something that gets around needing to set process.env.TZ that sounds great (as setting that globally isn't ideal for a library) (unless this was something @lukehesluke already tried when working on the Gist above?)