Eaton 9E 2000i added

Eaton/Eaton__9E2000i__usbhid-ups__2.8.4.787-787+gf8ecd520a__01.dev

@@ -0,0 +1,318 @@
+# DEVICE:COMMENT:
+# Device dump generated by ./nut-ddl-dump.sh on Wed, 26 Nov 2025 21:26:38 +0200
+# DEVICE:EOC
+
+# :; upsc [email protected]
+battery.capacity: 7.00
+battery.charge: 100
+battery.charge.low: 20
+battery.charge.restart: 0
+battery.charger.type: Constant Charge (CC)
+battery.protection: yes
+battery.runtime: 3353
+battery.runtime.low: 180
+battery.type: PbAc
+battery.voltage: 83.0
+battery.voltage.nominal: 72
+device.mfr: EATON
+device.model: 9E2000i
+device.serial: GE16F43216
+device.type: ups
+device.usb.version: 01.29
+driver.debug: 0
+driver.flag.allow_killpower: 0
+driver.name: usbhid-ups
+driver.parameter.interrupt_pipe_no_events_tolerance: -1
+driver.parameter.pollfreq: 30
+driver.parameter.pollinterval: 2
+driver.parameter.port: auto
+driver.parameter.synchronous: auto
+driver.state: quiet
+driver.version: 2.8.4.787-787+gf8ecd520a
+driver.version.data: MGE HID 1.57
+driver.version.internal: 0.71
+driver.version.usb: libusb-1.0.29 (API: 0x0100010A)
+experimental.ups.mode.buzzwords: vendor:mge-hid:ECO vendor:default:ECO
+input.bypass.frequency: 49.9
+input.bypass.switch.off: disabled
+input.bypass.switch.on: disabled
+input.bypass.switchable: enabled
+input.bypass.voltage: 235.0
+input.eco.switchable: ECO
+input.frequency: 49.9
+input.frequency.nominal: 50
+input.transfer.bypass.forced: enabled
+input.transfer.bypass.high: 264
+input.transfer.bypass.low: 184
+input.transfer.bypass.overload: enabled
+input.transfer.eco.high: 243
+input.transfer.eco.low: 218
+input.transfer.frequency.bypass.range: 10
+input.transfer.frequency.eco.range: 5
+input.transfer.high: 300
+input.transfer.hysteresis: 10
+input.transfer.low: 100
+input.voltage: 235.0
+input.voltage.nominal: 235
+outlet.1.designator: AC OUTPUT
+outlet.1.protect.status: protected
+outlet.1.status: on
+outlet.desc: Main Outlet
+outlet.id: 0
+outlet.switchable: no
+output.current: 1.40
+output.frequency: 49.9
+output.frequency.nominal: 50
+output.voltage: 236.0
+output.voltage.nominal: 230
+ups.beeper.status: enabled
+ups.delay.shutdown: 20
+ups.delay.start: 30
+ups.firmware: 00.02.000
+ups.load: 17
+ups.load.high: 105
+ups.mfr: EATON
+ups.model: 9E2000i
+ups.power: 340
+ups.power.nominal: 2000
+ups.productid: ffff
+ups.realpower: 296
+ups.realpower.nominal: 1600
+ups.serial: GE16F43216
+ups.shutdown: enabled
+ups.start.auto: yes
+ups.start.battery: yes
+ups.start.reboot: yes
+ups.status: OL
+ups.temperature: 24.9
+ups.test.interval: 604800
+ups.test.result: Done and passed
+ups.timer.shutdown: -1
+ups.timer.start: -1
+ups.type: online
+ups.vendorid: 0463
+
+# DEVICE:COMMENT-BLOCK:FIXME:UPSRW: [email protected]
+# [battery.charge.low]
+# Remaining battery level when UPS switches to LB (percent)
+# Type: STRING
+# Maximum length: 5
+# Value: 20
+#
+# [battery.charge.restart]
+# Minimum battery level for restart after power off (percent)
+# Type: STRING
+# Maximum length: 3
+# Value: 0
+#
+# [battery.protection]
+# Prevent deep discharge of battery
+# Type: STRING
+# Maximum length: 5
+# Value: yes
+#
+# [battery.runtime.low]
+# Remaining battery runtime when UPS switches to LB (seconds)
+# Type: STRING
+# Maximum length: 10
+# Value: 180
+#
+# [driver.debug]
+# Current debug verbosity level of the driver program
+# Type: NUMBER
+# Value: 0
+#
+# [driver.flag.allow_killpower]
+# Safety flip-switch to allow the driver daemon to send UPS shutdown command (accessible via driver.killpower)
+# Type: NUMBER
+# Value: 0
+#
+# [input.bypass.switch.off]
+# Take the UPS out of Bypass mode
+# Type: STRING
+# Maximum length: 12
+# Value: disabled
+#
+# [input.bypass.switch.on]
+# Put the UPS in Bypass mode
+# Type: STRING
+# Maximum length: 8
+# Value: disabled
+#
+# [input.bypass.switchable]
+# Input auto transfer on Bypass when overload or out of tolerance (enabled or disabled)
+# Type: STRING
+# Maximum length: 8
+# Value: enabled
+#
+# [input.eco.switchable]
+# Input High Efficiency (aka ECO) mode switch
+# Type: STRING
+# Maximum length: 8
+# Value: ECO
+#
+# [input.transfer.bypass.forced]
+# Rule for allow auto Bypass switch (on/off) transfer modes (enabled or disabled)
+# Type: STRING
+# Maximum length: 8
+# Value: enabled
+#
+# [input.transfer.bypass.high]
+# High voltage Bypass transfer point (V)
+# Type: STRING
+# Maximum length: 5
+# Value: 264
+#
+# [input.transfer.bypass.low]
+# Low voltage Bypass transfer point (V)
+# Type: STRING
+# Maximum length: 5
+# Value: 184
+#
+# [input.transfer.bypass.overload]
+# Rule for auto transfer on Bypass when overload (enabled or disabled)
+# Type: STRING
+# Maximum length: 8
+# Value: enabled
+#
+# [input.transfer.eco.high]
+# High voltage ECO transfer point (V)
+# Type: STRING
+# Maximum length: 5
+# Value: 243
+#
+# [input.transfer.eco.low]
+# Low voltage ECO transfer point (V)
+# Type: STRING
+# Maximum length: 5
+# Value: 218
+#
+# [input.transfer.frequency.bypass.range]
+# Frequency range Bypass transfer point (percent of nominal Hz)
+# Type: STRING
+# Maximum length: 5
+# Value: 10
+#
+# [input.transfer.frequency.eco.range]
+# Frequency range ECO transfer point (percent of nominal Hz)
+# Type: STRING
+# Maximum length: 5
+# Value: 5
+#
+# [input.transfer.high]
+# High voltage transfer point (V)
+# Type: STRING
+# Maximum length: 5
+# Value: 300
+#
+# [input.transfer.hysteresis]
+# Threshold of switching protection modes, voltage transfer point (V)
+# Type: STRING
+# Maximum length: 5
+# Value: 10
+#
+# [input.transfer.low]
+# Low voltage transfer point (V)
+# Type: STRING
+# Maximum length: 5
+# Value: 100
+#
+# [outlet.desc]
+# Outlet description
+# Type: STRING
+# Maximum length: 20
+# Value: Main Outlet
+#
+# [output.voltage.nominal]
+# Nominal output voltage (V)
+# Type: ENUM STRING
+# Maximum length: 3
+# Option: "200"
+# Option: "208"
+# Option: "220"
+# Option: "230" SELECTED
+# Option: "240"
+#
+# [ups.delay.shutdown]
+# Interval to wait after shutdown with delay command (seconds)
+# Type: STRING
+# Maximum length: 10
+# Value: 20
+#
+# [ups.delay.start]
+# Interval to wait before (re)starting the load (seconds)
+# Type: STRING
+# Maximum length: 10
+# Value: 30
+#
+# [ups.load.high]
+# Load when UPS switches to overload condition (percent)
+# Type: STRING
+# Maximum length: 5
+# Value: 105
+#
+# [ups.shutdown]
+# Enable or disable UPS shutdown ability (poweroff)
+# Type: ENUM STRING
+# Maximum length: 10
+# Option: "disabled"
+# Option: "enabled" SELECTED
+#
+# [ups.start.auto]
+# UPS starts when mains is (re)applied
+# Type: STRING
+# Maximum length: 5
+# Value: yes
+#
+# [ups.start.battery]
+# Allow to start UPS from battery
+# Type: STRING
+# Maximum length: 5
+# Value: yes
+#
+# [ups.start.reboot]
+# UPS reboots when power returns during shutdown delay
+# Type: STRING
+# Maximum length: 5
+# Value: yes
+#
+# [ups.test.interval]
+# Interval between self tests (seconds)
+# Type: STRING
+# Maximum length: 8
+# Value: 604800
+# DEVICE:EOC
+
+# DEVICE:COMMENT-BLOCK:FIXME:UPSCMD: [email protected]
+# Instant commands supported on UPS [Eaton9E2000i]:
+#
+# beeper.disable - Disable the UPS beeper
+# beeper.enable - Enable the UPS beeper
+# beeper.mute - Temporarily mute the UPS beeper
+# beeper.off - Obsolete (use beeper.disable or beeper.mute)
+# beeper.on - Obsolete (use beeper.enable)
+# bypass.start - Put the UPS in Bypass mode
+# bypass.stop - Take the UPS out of Bypass mode
+# driver.killpower - Tell the driver daemon to initiate UPS shutdown; should be unlocked with driver.flag.allow_killpower option or variable setting
+# driver.reload - Reload running driver configuration from the file system (only works for changes in some options)
+# driver.reload-or-error - Reload running driver configuration from the file system (only works for changes in some options); return an error if something changed and could not be applied live (so the caller can restart it with new options)
+# driver.reload-or-exit - Reload running driver configuration from the file system (only works for changes in some options); exit the running driver if something changed and could not be applied live (so service management framework can restart it with new options)
+# experimental.bypass.ecomode.start - Put UPS in Bypass mode then High Efficiency (aka ECO) mode
+# experimental.bypass.ecomode.stop - Take the UPS out of High Efficiency (aka ECO) mode after exiting Bypass mode
+# experimental.ecomode.start - Put UPS in High Efficiency (aka ECO) mode
+# experimental.ecomode.stop - Take the UPS out of High Efficiency (aka ECO) mode
+# experimental.essmode.start - Put UPS in Energy Saver System (aka ESS) mode
+# experimental.essmode.stop - Take the UPS out of Energy Saver System (aka ESS) mode
+# load.off - Turn off the load immediately
+# load.off.delay - Turn off the load with a delay (seconds)
+# load.on - Turn on the load immediately
+# load.on.delay - Turn on the load with a delay (seconds)
+# shutdown.default - Run the driver-defined UPS shutdown sequence (as opposed to user-configured 'sdcommands')
+# shutdown.return - Turn off the load and return when power is back
+# shutdown.stayoff - Turn off the load and remain off
+# shutdown.stop - Stop a shutdown in progress
+# test.battery.start.deep - Start a deep battery test
+# test.battery.start.quick - Start a quick battery test
+# test.battery.stop - Stop the battery test
+# DEVICE:EOC
+