Request for AX58100-STMBL adapter KiCad source or connector pin mapping

[truyentu]

Hi Kuba,

I am working on integrating an AX58100 EtherCAT adapter

The public documentation includes the AX58100-STMBL adapter render and IBOM:

• https://kubabuda.github.io/ecat_servo/008-ax58100-board-rev2
• https://kubabuda.github.io/ecat_servo/html/ax58100_stmbl_ibom.html

However, I could not find the KiCad schematic/PCB source or netlist for the AX58100-STMBL adapter board in the repository.

Would you be willing to publish or share the KiCad project files, or at least the connector pin mapping for the STMBL EXT connector?

The most important signals I need to verify are:

• P3/STMBL EXT mapping
• SPI CLK/SCK
• SPI MISO
• SPI MOSI
• SPI SCS/chip-select
• PDI INT
• SYNC0
• SYNC1
• AX58100 reset, if exposed
• power rails: +5V, +24V, 3.3V, GND
• whether SCS/SYNC1 use SWDIO/SWCLK pins on STMBL

I want to avoid unsafe assumptions before writing firmware that drives STM32F405 GPIO/SPI pins.

Thanks!