WalkSnail Moonlight OSD does not work with INAV 8

[boylect]

Current Behavior

Despite being enabled via Configuration tab, ports tab, and configured in OSD tab, the OSD will not disaply for the WalkSnail Moonlight.

Steps to Reproduce

1. Set UART to MSP DisplayPort
2. Ensure OSD is toggled on on Configuration Tab
3. Select Avatar on OSD drop down menu

Expected behavior

I expected to have an OSD

Suggested solution(s)

I reflashed my drone with BetaFlight and the OSD works. It just will not work in INAV8 (or in INAV 7.1.2)

---

• HAKRC F722D:
• INAV 7.1.2 and INAV 8:

[Itay-Sharoni]

I use IANV 8.0 with walksnail Moonlight, i have no issues and OSD works perfect. (tested with 8.0 RC and 8.0 official)

[boylect]

So weird.What am I doing wrong!? I was pulling my hair out yesterday trying to get it to work.On Mar 17, 2025, at 04:20, Itay Sharoni ***@***.***> wrote: I use IANV 8.0 with walksnail Moonlight, i have no issues and OSD works perfect. (tested with 8.0 RC and 8.0 official)—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***> Itay-Sharoni left a comment (iNavFlight/inav#10761) I use IANV 8.0 with walksnail Moonlight, i have no issues and OSD works perfect. (tested with 8.0 RC and 8.0 official) —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>