Update of all variant files to add BAT_VOLT_PIN for all variants that define a battery voltage pin (#11954)

mitra42 · pre-commit-ci-lite[bot] · web-flow · commit 01f07438b816 · 2025-10-27T14:54:20.000+02:00
* Add BAT_VOLT_PIN for all variants that define a battery voltage pin with any obviously discoverable name.

* ci(pre-commit): Apply automatic fixes

---------

Co-authored-by: pre-commit-ci-lite[bot] &lt;117423508+pre-commit-ci-lite[bot]@users.noreply.github.com&gt;
diff --git a/variants/Bee_Data_Logger/pins_arduino.h b/variants/Bee_Data_Logger/pins_arduino.h
@@ -60,6 +60,7 @@ static const uint8_t T14 = 14;
 
 static const uint8_t BOOT_BTN = 0;
 static const uint8_t VBAT_VOLTAGE = 1;
+#define BAT_VOLT_PIN VBAT_VOLTAGE
 static const uint8_t VBUS_SENSE = 2;
 static const uint8_t LDO2 = 34;
 static const uint8_t RGB_DATA = 40;
diff --git a/variants/Bee_Motion_S3/pins_arduino.h b/variants/Bee_Motion_S3/pins_arduino.h
@@ -66,6 +66,7 @@ static const uint8_t T14 = 14;
 
 static const uint8_t BOOT_BTN = 0;
 static const uint8_t VBAT_VOLTAGE = 1;
+#define BAT_VOLT_PIN VBAT_VOLTAGE
 static const uint8_t VBUS_SENSE = 2;
 static const uint8_t PIR = 4;
 static const uint8_t LIGHT = 3;
diff --git a/variants/Bee_S3/pins_arduino.h b/variants/Bee_S3/pins_arduino.h
@@ -58,6 +58,7 @@ static const uint8_t T9 = 9;
 static const uint8_t T10 = 10;
 
 static const uint8_t VBAT_VOLTAGE = 1;
+#define BAT_VOLT_PIN VBAT_VOLTAGE
 
 static const uint8_t RGB_DATA = 48;
 static const uint8_t RGB_PWR = 34;
diff --git a/variants/Pcbcupid_GLYPH_C3/pins_arduino.h b/variants/Pcbcupid_GLYPH_C3/pins_arduino.h
@@ -10,7 +10,8 @@ static const uint8_t LED_BUILTIN = 1;
 
 //MSR Used in on-board battery measurement
 static const uint8_t BAT_MEASURE = 0;
-#define MSR BAT_MEASURE
+#define BAT_VOLT_PIN BAT_MEASURE
+#define MSR          BAT_MEASURE
 
 static const uint8_t TX = 21;
 static const uint8_t RX = 20;
diff --git a/variants/Pcbcupid_GLYPH_C6/pins_arduino.h b/variants/Pcbcupid_GLYPH_C6/pins_arduino.h
@@ -10,7 +10,8 @@ static const uint8_t LED_BUILTIN = 14;
 
 //MSR Used in on-board battery measurement
 static const uint8_t BAT_MEASURE = 0;
-#define MSR BAT_MEASURE
+#define BAT_VOLT_PIN BAT_MEASURE
+#define MSR          BAT_MEASURE
 
 static const uint8_t TX = 16;
 static const uint8_t RX = 17;
diff --git a/variants/Pcbcupid_GLYPH_H2/pins_arduino.h b/variants/Pcbcupid_GLYPH_H2/pins_arduino.h
@@ -10,7 +10,8 @@ static const uint8_t LED_BUILTIN = 0;
 
 //MSR Used in on-board battery measurement
 static const uint8_t BAT_MEASURE = 1;
-#define MSR BAT_MEASURE
+#define BAT_VOLT_PIN BAT_MEASURE
+#define MSR          BAT_MEASURE
 
 static const uint8_t TX = 24;
 static const uint8_t RX = 23;
diff --git a/variants/XIAO_ESP32S3_Plus/pins_arduino.h b/variants/XIAO_ESP32S3_Plus/pins_arduino.h
@@ -55,6 +55,7 @@ static const uint8_t A8 = 7;
 static const uint8_t A9 = 8;
 static const uint8_t A10 = 9;
 static const uint8_t ADC_BAT = 10;
+#define BAT_VOLT_PIN ADC_BAT
 
 static const uint8_t D0 = 1;
 static const uint8_t D1 = 2;
diff --git a/variants/adafruit_camera_esp32s3/pins_arduino.h b/variants/adafruit_camera_esp32s3/pins_arduino.h
@@ -43,6 +43,7 @@ static const uint8_t MISO = 37;
 static const uint8_t A0 = 17;
 static const uint8_t A1 = 18;
 static const uint8_t BATT_MONITOR = 4;
+#define BAT_VOLT_PIN BATT_MONITOR
 static const uint8_t SHUTTER_BUTTON = 0;
 
 static const uint8_t TX = 43;
diff --git a/variants/adafruit_feather_esp32_v2/pins_arduino.h b/variants/adafruit_feather_esp32_v2/pins_arduino.h
@@ -35,6 +35,7 @@ static const uint8_t A13 = 35;
 
 // vbat measure
 #define BATT_MONITOR 35
+#define BAT_VOLT_PIN BATT_MONITOR
 
 // internal switch
 #define BUTTON 38
diff --git a/variants/adafruit_magtag29_esp32s2/pins_arduino.h b/variants/adafruit_magtag29_esp32s2/pins_arduino.h
@@ -44,6 +44,7 @@ static const uint8_t BUTTON_D = PIN_BUTTON4;
 
 static const uint8_t LIGHT_SENSOR = 3;
 static const uint8_t BATT_MONITOR = 4;
+#define BAT_VOLT_PIN BATT_MONITOR
 static const uint8_t SPEAKER_SHUTDOWN = 16;
 
 static const uint8_t SDA = 33;
diff --git a/variants/cyobot_v2_esp32s3/pins_arduino.h b/variants/cyobot_v2_esp32s3/pins_arduino.h
@@ -12,6 +12,7 @@ static const uint8_t BUTTON1 = 38;
 static const uint8_t LED = 24;
 
 static const uint8_t BAT_MEAS = 6;
+#define BAT_VOLT_PIN BAT_MEAS
 static const uint8_t CHAR_DET = 23;
 
 static const uint8_t NEO_BASE = 7;
diff --git a/variants/cytron_maker_feather_aiot_s3/pins_arduino.h b/variants/cytron_maker_feather_aiot_s3/pins_arduino.h
@@ -29,6 +29,7 @@ static const uint8_t RGB_BUILTIN = SOC_GPIO_PIN_COUNT + 46;  // RGB LED.
 
 #define VIN             13  // Vin Sense.
 #define VBATT           13
+#define BAT_VOLT_PIN    VBATT
 #define VOLTAGE_MONITOR 13
 
 static const uint8_t TX = 15;
diff --git a/variants/d1_mini32/pins_arduino.h b/variants/d1_mini32/pins_arduino.h
@@ -8,6 +8,7 @@ static const uint8_t LED_BUILTIN = 2;
 #define BUILTIN_LED LED_BUILTIN   // backward compatibility
 #define LED_BUILTIN LED_BUILTIN   // allow testing #ifdef LED_BUILTIN
 static const uint8_t _VBAT = 35;  // battery voltage
+#define BAT_VOLT_PIN _VBAT
 
 #define PIN_WIRE_SDA SDA  // backward compatibility
 #define PIN_WIRE_SCL SCL  // backward compatibility
diff --git a/variants/d32/pins_arduino.h b/variants/d32/pins_arduino.h
@@ -8,5 +8,6 @@ static const uint8_t LED_BUILTIN = 5;
 #define BUILTIN_LED LED_BUILTIN   // backward compatibility
 #define LED_BUILTIN LED_BUILTIN   // allow testing #ifdef LED_BUILTIN
 static const uint8_t _VBAT = 35;  // battery voltage
+#define BAT_VOLT_PIN _VBAT
 
 #endif /* Pins_Arduino_h */
diff --git a/variants/d32_pro/pins_arduino.h b/variants/d32_pro/pins_arduino.h
@@ -9,6 +9,7 @@ static const uint8_t LED_BUILTIN = 5;
 #define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
 
 static const uint8_t _VBAT = 35;  // battery voltage
+#define BAT_VOLT_PIN _VBAT
 
 #define TF_CS   4   // TF (Micro SD Card) CS pin
 #define TS_CS   12  // Touch Screen CS pin
diff --git a/variants/deneyapkart1Av2/pins_arduino.h b/variants/deneyapkart1Av2/pins_arduino.h
@@ -102,5 +102,6 @@ static const uint8_t SDCS = 11;
 static const uint8_t SDCK = 13;
 
 static const uint8_t BAT = 9;
+#define BAT_VOLT_PIN BAT
 
 #endif /* Pins_Arduino_h */
diff --git a/variants/deneyapkartv2/pins_arduino.h b/variants/deneyapkartv2/pins_arduino.h
@@ -119,5 +119,6 @@ static const uint8_t SDCK = 13;
 static const uint8_t SDDA = 14;
 
 static const uint8_t BAT = 3;
+#define BAT_VOLT_PIN BAT
 
 #endif /* Pins_Arduino_h */
diff --git a/variants/esp32c3-devkit-lipo/pins_arduino.h b/variants/esp32c3-devkit-lipo/pins_arduino.h
@@ -28,6 +28,7 @@ static const uint8_t SCK = 4;
 //static const uint8_t PWR_SENSE = 4;
 // battery measurement - disabled by default - check the schematic
 //static const uint8_t BAT_SENSE = 3;
+// #define BAT_VOLT_PIN BAT_SENSE
 static const uint8_t A0 = 0;
 static const uint8_t A1 = 1;
 static const uint8_t A2 = 2;
diff --git a/variants/esp32micromod/pins_arduino.h b/variants/esp32micromod/pins_arduino.h
@@ -25,6 +25,7 @@ static const uint8_t SCK = 18;
 static const uint8_t A0 = 34;
 static const uint8_t A1 = 35;
 static const uint8_t BATT_VIN = 39;
+#define BAT_VOLT_PIN BATT_VIN
 
 static const uint8_t PWM0 = 13;
 static const uint8_t PWM1 = 12;
diff --git a/variants/esp32s2-devkit-lipo-usb/pins_arduino.h b/variants/esp32s2-devkit-lipo-usb/pins_arduino.h
@@ -27,6 +27,7 @@ static const uint8_t SCK = 36;
 //static const uint8_t PWR_SENSE = 7;
 // battery measurement - disabled by default - check the schematic
 //static const uint8_t BAT_SENSE = 8;
+// #define BAT_VOLT_PIN BAT_SENSE
 
 static const uint8_t A0 = 1;
 static const uint8_t A1 = 2;
diff --git a/variants/esp32s2-devkit-lipo/pins_arduino.h b/variants/esp32s2-devkit-lipo/pins_arduino.h
@@ -29,6 +29,7 @@ static const uint8_t SCK = 36;
 //static const uint8_t PWR_SENSE = 7;
 // battery measurement - disabled by default - check the schematic
 //static const uint8_t BAT_SENSE = 8;
+// #define BAT_VOLT_PIN BAT_SENSE
 
 static const uint8_t A0 = 1;
 static const uint8_t A1 = 2;
diff --git a/variants/esp32s3-devkit-lipo/pins_arduino.h b/variants/esp32s3-devkit-lipo/pins_arduino.h
@@ -35,6 +35,7 @@ static const uint8_t SCK = 12;
 static const uint8_t PWR_SENSE = 5;
 // battery measurement
 static const uint8_t BAT_SENSE = 6;
+#define BAT_VOLT_PIN BAT_SENSE
 
 static const uint8_t A0 = 1;
 static const uint8_t A1 = 2;
diff --git a/variants/esp32s3usbotg/pins_arduino.h b/variants/esp32s3usbotg/pins_arduino.h
@@ -68,6 +68,7 @@ static const uint8_t T3 = 3;
 #define OVER_CURRENT 21  // Current overrun signal, high level means overrun.
 #define HOST_VOLTS   1   // USB_DEV voltage monitoring, ADC1 channel 0. actual_v = value_v * 3.7
 #define BAT_VOLTS    2   // Battery voltage monitoring, ADC1 channel 1. actual_v = value_v * 2
+#define BAT_VOLT_PIN BAT_VOLTS
 
 // USB Port
 #define USB_DN 19  // USB D-
diff --git a/variants/feather_esp32/pins_arduino.h b/variants/feather_esp32/pins_arduino.h
@@ -38,6 +38,7 @@ static const uint8_t A12 = 13;
 
 // vbat measure
 static const uint8_t BATT_MONITOR = 35;
+#define BAT_VOLT_PIN BATT_MONITOR
 static const uint8_t A13 = 35;
 //static const uint8_t Ax = 0; // not used/available
 //static const uint8_t Ax = 2; // not used/available
diff --git a/variants/fed4/pins_arduino.h b/variants/fed4/pins_arduino.h
@@ -51,6 +51,7 @@ static const uint8_t T6 = 6;
 
 static const uint8_t BOOT_BTN = 0;
 static const uint8_t VBAT_VOLTAGE = 7;
+#define BAT_VOLT_PIN VBAT_VOLTAGE
 static const uint8_t LDO2 = 47;
 static const uint8_t STATUS_RGB = 35;
 static const uint8_t RGB_STRIP = 36;
diff --git a/variants/fobe_quill_esp32s3_mesh/pins_arduino.h b/variants/fobe_quill_esp32s3_mesh/pins_arduino.h
@@ -17,7 +17,8 @@
 /*
  * Battery
  */
-#define PIN_VBAT (10)
+#define PIN_VBAT     (10)
+#define BAT_VOLT_PIN PIN_VBAT
 
 /*
  * Buttons
diff --git a/variants/fri3d_2024_esp32s3/pins_arduino.h b/variants/fri3d_2024_esp32s3/pins_arduino.h
@@ -35,6 +35,7 @@ static const uint8_t SCK = 7;
 #define PIN_BLASTER     10
 #define PIN_BUZZER      46
 #define PIN_BATTERY     13
+#define BAT_VOLT_PIN    PIN_BATTERY
 
 #define PIN_SDCARD_CS SS
 
diff --git a/variants/heltec_capsule_sensor_v3/pins_arduino.h b/variants/heltec_capsule_sensor_v3/pins_arduino.h
@@ -76,6 +76,7 @@ static const uint8_t GPS_RESET_PIN = 3;
 static const uint8_t GPS_PPS_PIN = 1;
 
 static const uint8_t ADC_BATTERY_PIN = 7;
+#define BAT_VOLT_PIN ADC_BATTERY_PIN
 static const uint8_t ADC_BATTERY_CTRL_PIN = 36;
 
 static const uint8_t RST_LoRa = 12;
diff --git a/variants/lilygo_t3_s3_lr1121/pins_arduino.h b/variants/lilygo_t3_s3_lr1121/pins_arduino.h
@@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;
 
 static const uint8_t BUTTON_1 = 0;
 static const uint8_t BAT_VOLT = 1;
+#define BAT_VOLT_PIN BAT_VOLT
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
diff --git a/variants/lilygo_t3_s3_sx1262/pins_arduino.h b/variants/lilygo_t3_s3_sx1262/pins_arduino.h
@@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;
 
 static const uint8_t BUTTON_1 = 0;
 static const uint8_t BAT_VOLT = 1;
+#define BAT_VOLT_PIN BAT_VOLT
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
diff --git a/variants/lilygo_t3_s3_sx127x/pins_arduino.h b/variants/lilygo_t3_s3_sx127x/pins_arduino.h
@@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;
 
 static const uint8_t BUTTON_1 = 0;
 static const uint8_t BAT_VOLT = 1;
+#define BAT_VOLT_PIN BAT_VOLT
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
diff --git a/variants/lilygo_t3_s3_sx1280/pins_arduino.h b/variants/lilygo_t3_s3_sx1280/pins_arduino.h
@@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;
 
 static const uint8_t BUTTON_1 = 0;
 static const uint8_t BAT_VOLT = 1;
+#define BAT_VOLT_PIN BAT_VOLT
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
diff --git a/variants/lilygo_t3_s3_sx1280pa/pins_arduino.h b/variants/lilygo_t3_s3_sx1280pa/pins_arduino.h
@@ -12,6 +12,7 @@ static const uint8_t LED_BUILTIN = 37;
 
 static const uint8_t BUTTON_1 = 0;
 static const uint8_t BAT_VOLT = 1;
+#define BAT_VOLT_PIN BAT_VOLT
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
diff --git a/variants/lilygo_t_display/pins_arduino.h b/variants/lilygo_t_display/pins_arduino.h
@@ -52,6 +52,7 @@ static const uint8_t DAC1 = 25;
 static const uint8_t DAC2 = 26;
 
 static const uint8_t VBAT = 34;
+#define BAT_VOLT_PIN VBAT
 
 static const uint8_t RIGHT_BUTTON = 35;
 static const uint8_t LEFT_BUTTON = 0;
diff --git a/variants/lilygo_t_display_s3/pins_arduino.h b/variants/lilygo_t_display_s3/pins_arduino.h
@@ -9,6 +9,7 @@
 static const uint8_t BUTTON_1 = 0;
 static const uint8_t BUTTON_2 = 14;
 static const uint8_t BAT_VOLT = 4;
+#define BAT_VOLT_PIN BAT_VOLT
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
diff --git a/variants/lolin_c3_pico/pins_arduino.h b/variants/lolin_c3_pico/pins_arduino.h
@@ -25,6 +25,7 @@ static const uint8_t SDA = 8;
 static const uint8_t SCL = 10;
 
 static const uint8_t VBAT = 3;
+#define BAT_VOLT_PIN VBAT
 
 static const uint8_t SCK = 1;
 static const uint8_t MISO = 0;
diff --git a/variants/oroca_edubot/pins_arduino.h b/variants/oroca_edubot/pins_arduino.h
@@ -35,6 +35,7 @@ static const uint8_t D8 = 33;
 
 // vbat measure
 static const uint8_t VBAT = 35;
+#define BAT_VOLT_PIN VBAT
 
 static const uint8_t T0 = 4;
 static const uint8_t T1 = 0;
diff --git a/variants/rakwireless_rak3112/pins_arduino.h b/variants/rakwireless_rak3112/pins_arduino.h
@@ -19,6 +19,7 @@ static const uint8_t LED_BUILTIN = LED_GREEN;
 #define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
 
 static const uint8_t BAT_VOLT = 21;
+#define BAT_VOLT_PIN BAT_VOLT
 
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;
diff --git a/variants/roboheart_hercules/pins_arduino.h b/variants/roboheart_hercules/pins_arduino.h
@@ -29,13 +29,14 @@
 #define TXD1 17
 
 // GSM Vela connector board pins
-#define GSM_PWRKEY  12
-#define GSM_DTR     13
-#define GSM_CTS     15
-#define GSM_RTS     14
-#define GSM_TX      TXD1
-#define GSM_RX      RXD1
-#define BATTERY_PIN 36  // Battery ADC pin
+#define GSM_PWRKEY   12
+#define GSM_DTR      13
+#define GSM_CTS      15
+#define GSM_RTS      14
+#define GSM_TX       TXD1
+#define GSM_RX       RXD1
+#define BATTERY_PIN  36  // Battery ADC pin
+#define BAT_VOLT_PIN BATTERY_PIN
 
 static const uint8_t TX = 35;
 static const uint8_t RX = 34;
diff --git a/variants/tamc_termod_s3/pins_arduino.h b/variants/tamc_termod_s3/pins_arduino.h
@@ -57,6 +57,7 @@ static const uint8_t T13 = 13;
 static const uint8_t T14 = 14;
 
 static const uint8_t BAT_LV = 1;
+#define BAT_VOLT_PIN BAT_LV
 static const uint8_t CHG = 2;
 static const uint8_t TFT_CS = 10;
 static const uint8_t TFT_DC = 18;
diff --git a/variants/thingpulse_epulse_feather/pins_arduino.h b/variants/thingpulse_epulse_feather/pins_arduino.h
@@ -32,6 +32,7 @@ static const uint8_t A12 = 13;
 
 // vbat measure
 static const uint8_t BATT_MONITOR = 35;  // Note: voltage divider 2.2M/4.7M
+#define BAT_VOLT_PIN BATT_MONITOR
 static const uint8_t A13 = 35;
 //static const uint8_t Ax = 0; // not used/available
 //static const uint8_t Ax = 2; // not used/available? GPIO02 is available!
diff --git a/variants/ttgo-t-oi-plus/pins_arduino.h b/variants/ttgo-t-oi-plus/pins_arduino.h
@@ -23,5 +23,6 @@ static const uint8_t A2 = 4;
 static const uint8_t A3 = 5;
 
 static const uint8_t BAT_ADC_PIN = 2;
+#define BAT_VOLT_PIN BAT_ADC_PIN
 
 #endif /* Pins_Arduino_h */
diff --git a/variants/uPesy_esp32c3_basic/pins_arduino.h b/variants/uPesy_esp32c3_basic/pins_arduino.h
@@ -28,5 +28,6 @@ static const uint8_t A4 = 4;
 static const uint8_t A5 = 5;
 
 static const uint8_t VBAT_SENSE = 0;
+#define BAT_VOLT_PIN VBAT_SENSE
 
 #endif /* Pins_Arduino_h */
diff --git a/variants/uPesy_esp32c3_mini/pins_arduino.h b/variants/uPesy_esp32c3_mini/pins_arduino.h
@@ -27,5 +27,6 @@ static const uint8_t A4 = 4;
 static const uint8_t A5 = 5;
 
 static const uint8_t VBAT_SENSE = 0;
+#define BAT_VOLT_PIN VBAT_SENSE
 
 #endif /* Pins_Arduino_h */
diff --git a/variants/um_bling/pins_arduino.h b/variants/um_bling/pins_arduino.h
@@ -52,6 +52,7 @@ static const uint8_t BUTTON_C = 33;
 static const uint8_t BUTTON_D = 34;
 
 static const uint8_t VBAT_SENSE = 17;
+#define BAT_VOLT_PIN VBAT_SENSE
 static const uint8_t VBUS_SENSE = 16;
 
 static const uint8_t I2S_MIC_SEL = 39;
diff --git a/variants/um_feathers2neo/pins_arduino.h b/variants/um_feathers2neo/pins_arduino.h
@@ -65,6 +65,7 @@ static const uint8_t LED_BUILTIN = RGB_BUILTIN;
 static const uint8_t NEOPIXEL_PWR = 39;
 
 static const uint8_t VBAT_SENSE = 2;
+#define BAT_VOLT_PIN VBAT_SENSE
 static const uint8_t VBUS_SENSE = 34;
 
 #endif /* Pins_Arduino_h */
diff --git a/variants/um_feathers3/pins_arduino.h b/variants/um_feathers3/pins_arduino.h
@@ -54,6 +54,7 @@ static const uint8_t T12 = 12;
 static const uint8_t T14 = 14;
 
 static const uint8_t VBAT_SENSE = 2;
+#define BAT_VOLT_PIN VBAT_SENSE
 static const uint8_t VBUS_SENSE = 34;
 
 // User LED
diff --git a/variants/um_feathers3neo/pins_arduino.h b/variants/um_feathers3neo/pins_arduino.h
@@ -50,6 +50,7 @@ static const uint8_t T12 = 12;
 static const uint8_t T14 = 14;
 
 static const uint8_t VBAT_SENSE = 2;
+#define BAT_VOLT_PIN VBAT_SENSE
 static const uint8_t VBUS_SENSE = 15;
 
 // User LED
diff --git a/variants/um_pros3/pins_arduino.h b/variants/um_pros3/pins_arduino.h
diff --git a/variants/um_tinyc6/pins_arduino.h b/variants/um_tinyc6/pins_arduino.h
diff --git a/variants/um_tinys2/pins_arduino.h b/variants/um_tinys2/pins_arduino.h
diff --git a/variants/um_tinys3/pins_arduino.h b/variants/um_tinys3/pins_arduino.h
diff --git a/variants/watchy/pins_arduino.h b/variants/watchy/pins_arduino.h
diff --git a/variants/waveshare_esp32_s3_lcd_169/pins_arduino.h b/variants/waveshare_esp32_s3_lcd_169/pins_arduino.h
diff --git a/variants/waveshare_esp32_s3_touch_amoled_143/pins_arduino.h b/variants/waveshare_esp32_s3_touch_amoled_143/pins_arduino.h
diff --git a/variants/waveshare_esp32_s3_touch_amoled_164/pins_arduino.h b/variants/waveshare_esp32_s3_touch_amoled_164/pins_arduino.h
diff --git a/variants/waveshare_esp32_s3_touch_amoled_191/pins_arduino.h b/variants/waveshare_esp32_s3_touch_amoled_191/pins_arduino.h
diff --git a/variants/waveshare_esp32_s3_touch_amoled_241/pins_arduino.h b/variants/waveshare_esp32_s3_touch_amoled_241/pins_arduino.h
diff --git a/variants/waveshare_esp32_s3_touch_lcd_169/pins_arduino.h b/variants/waveshare_esp32_s3_touch_lcd_169/pins_arduino.h
