Black screen when using Sandisk 1TB card on OLED

[sthetix]

As the title says, the screen goes black screen after showing the Nintendo logo when using any Sandisk 1TB cards on Emummc
. It doesn't happen on any lower-capacity Sandisk cards. Maybe it is due to a different sd card structure or a newer version of the atmosphere.
FYI, I am using atmosphere 1.3.2 on firmware 14.1.1. I didn't find this issue on atmosphere 1.3.1 and firmware 14.1.1

Thanks

[muxi1]

The problem also exists on other capacities, such as 512 GB or 400 GB cards under all FW versions I have tested so far (14.1.1, 14.1.2 and 15.0.0).

[Lamcza]

The problem also exists on other capacities, such as 512 GB or 400 GB cards under all FW versions I have tested so far (14.1.1, 14.1.2 and 15.0.0, hekate 5.9-6.0.1).

Yep i tested it on the same files and clean emu(14.1.2-15.0.1, atmo 14-14.1)

128gb kingstone-black screen(old card)
128gb transcend( two cards new)-ok
128gb samsung evo plus(new)-ok
512gb samsung select (blue)-black screen(two cards new)
512gbl exar play(new)-black screen

https://gbatemp.net/threads/sys-ftpd-light-black-screen-after-nintendo-logo.625300/

[Lamcza]

@sthetix @muxi1 what cards do guys have and if it is SanDisk is it just ultra or something better?

[muxi1]

@Lamcza I use SanDisk Ultra & Samsung EVO plus SD cards. However, the problem does not exist under my Erista consoles, but only under my Mariko & my Aula console.

[Lamcza]

@Lamcza I use SanDisk Ultra & Samsung EVO plus SD cards. However, the problem does not exist under my Erista consoles, but only under my Mariko & my Aula console.

wow this is so random i get it on v1

[sthetix]

It only happens on oled. 512gb sandisk and 1tb sandisk

…

On Wed, Feb 1, 2023, 16:36 Lamcza ***@***.***> wrote: @Lamcza <https://github.com/Lamcza> I use SanDisk Ultra & Samsung EVO plus SD cards. However, the problem does not exist under my Erista consoles, but only under my Mariko & my Aula console. wow this is so random i get it on v1 — Reply to this email directly, view it on GitHub <#22 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AFJ23D4S5YLMQ6ZYQAMXITDWVIVBVANCNFSM5VAYR4YQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[Lamcza]

It only happens on oled. 512gb sandisk and 1tb sandisk
…
On Wed, Feb 1, 2023, 16:36 Lamcza @.> wrote: @Lamcza https://github.com/Lamcza I use SanDisk Ultra & Samsung EVO plus SD cards. However, the problem does not exist under my Erista consoles, but only under my Mariko & my Aula console. wow this is so random i get it on v1 — Reply to this email directly, view it on GitHub <#22 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/AFJ23D4S5YLMQ6ZYQAMXITDWVIVBVANCNFSM5VAYR4YQ . You are receiving this because you were mentioned.Message ID: @.>

Yesterday i discovered that booting to Hekate by "reboot to payload" hb instead of power/restart working fine (no black screen):X also, ppl are reporting that having emu in a file resolves the issue.

So do you guys have atmo in partition or file and perhaps "reboot to payload" hb works for you too?