Welcome to dperf Discussions!

[pengjianzhang]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[zrgtester]

请问为什么我使用payload_file参数像打纯tcp流量而非http流量时，通过抓包看到仅能看到三次握手就不再发包了。而使用payload_size参数就是正常的。配置如下

client conf：
mode client
tx_burst 32
launch_num 10
cpu 1
socket_mem 2500
protocol tcp
#payload_size 128
payload_file /root/tcp_load1.txt
duration 36h
cps 1
cc 1
keepalive 50ms
port 0000:05:00.0 172.16.1.2 172.16.1.1
client 20.1.1.1 100
server 192.168.1.1 1
listen 13000 15

server conf:
mode server
tx_burst 32
launch_num 10
cpu 6
socket_mem 2500
protocol tcp
duration 36h
payload_size 200
#payload_file tcp_load.txt
keepalive 50ms
port 0000:05:00.0 172.16.1.2 172.16.1.1
client 20.1.1.1 100
server 192.168.1.1 1
listen 13000 15

[zrgtester]

看了下代码，定位是在http_set_payload 函数中一个bug导致的。@pengjianzhang
if (cfg->server) {
strcpy(http_rsp, payload);
} else {
strcpy(http_rsp, payload);
}
在else中应该拷贝到http_req中。修改后重新编译后可用。

[pengjianzhang]

请新开一个Discussion讨论，不是在这里跟贴，谢谢

[pengjianzhang]

已经修复了，请测一下最新代码