Raspbian Trixie on RPI5 issue with make

[saturnin94320]

[ 93%] Linking CXX executable phd2.bin
/usr/bin/ld : /home/rpi5/phd2/cameras/qhyccdlibs/linux/arm64/libqhyccd.a(qhy5iiibase.cpp.o) : dans la fonction « isLeapYear(int) » :
qhy5iiibase.cpp:(.text+0x0) : définitions multiples de « isLeapYear(int) »; /home/rpi5/phd2/cameras/zwolibs/linux/armv8/libASICamera2.a(CameraBase.o):CameraBase.cpp:(.text+0xc148) : défini pour la première fois ici
collect2: error: ld returned 1 exit status
make[2]: *** [CMakeFiles/phd2.dir/build.make:2253: phd2.bin] Error 1
make[1]: *** [CMakeFiles/Makefile2:1224: CMakeFiles/phd2.dir/all] Error 2
make: *** [Makefile:166: all] Error 2

It is curious because I compil several time in the same conditions with no issue.

[agalasso]

@saturnin94320 unfortunately there appears to be a name collision between the QHY and ZWO SDK libraries. The best solution would be to get QHY or ZWO to make some changes to their SDK so they do not conflict with each other. I can contact them to try to get that to happen.

In the meantime, assuming you do not need both (or either) of those cameras, a workaround would be to disable one or the other (or both) cameras from your build of PHD2. If you let me know which of these cameras you need (if any) I can give more detailed instructions.

[agalasso]

update: I reached out to both QHY and ZWO

[saturnin94320]

I use ZWO driver.

[agalasso]

I use ZWO driver.

you can temporarily disable the QHY driver by adding the following to the bottom of thirdparty/thirdparty.cmake:

remove_definitions(-DHAVE_QHY_CAMERA=1)

This shell command would do it -- run from the top-level phd2 repo directory:

echo 'remove_definitions(-DHAVE_QHY_CAMERA=1)' >> thirdparty/thirdparty.cmake

then configure and build as usual:

cmake -B tmp && make -C tmp -j8

[saturnin94320]

OK I made it. Then I try to install the binary by sudo make install:

make: *** Aucune règle pour fabriquer la cible « install ». Arrêt.
make: *** No rules for making the target "install". Stop.

[agalasso]

update: I reached out to both QHY and ZWO

update: both QHY and ZWO have responded and are working on fixes to their SDKs

[agalasso]

Then I try to install the binary by sudo make install

@saturnin94320 It looks like you may have run the command from the phd2 directory and there is no Makefile there -- the Makefile is in tmp/

To run make from the top-level phd2 directory, the command would be:

sudo make -C tmp install

which is equivalent to:

cd tmp
sudo make install

[saturnin94320]

It's OK with your details. Thanks.