OFW 22.0.0 and picofly timings

[SharinDarkSide]

Hello,

It seems the new OFW firwamre 22.0.0 have weird timings that mess up the picofly glitching on my Switch OLED (picofly firmware 2.80). If I perform a cold start (unplug the battery for a while), the picofly glitches to Hekate but as soon as I launch the OFW 22.0.0 once (my son updated the SysNand to play online), the timings become off and almost 100% of the times the picofly does not glitch and boots to OFW with two short red flashes on the picofly LED.

I am not sure whether this is related to the new OFW 22.0.0 timings change or maybe I need to reset my picofly timings. I already rechedked all the soldereing points and diode mode voltage drops, which all seem fine.

[DefenderOfHyrule]

personally, i cannot reproduce this. i would be happy to look into it, but i'm also about to release 2.81 which you could try out

i've not experienced anyone having this issue, but feel free to share more information regarding your setup (and potentially share your solder joints and such)

[SharinDarkSide]

Did you check there is no issues on a Switch updated to 22.0.0 OFW SysNAND? If so, it may be my soldering or my picofly chip having issues and therefore you can close this ticket.

By the way, is your firmware the same as the one under rehius/usk Git repository?

[DefenderOfHyrule]

my firmware has a bunch of changes that rehius' official repo doesn't have, I'm still working on a couple of things (as well as regressing certain aspects of my fork)

I'll likely be re-releasing 2.81 tomorrow (same release page, newly uploaded update.bin and firmware.uf2)

I have checked on all consoles I own that there are no issues with 22.0.0, but you can wait until tomorrow and try the newly uploaded release